Bosch GSR 18V-50 06019H5006 - Инструкция по эксплуатации - Страница 18

18

 | English

GSB 18V-50

Set the operating mode presetting ring 

(4)

 to

the "screwdriving" symbol.
Set the torque presetting ring 

(3)

 to the re-

quired torque.

Impact drilling

GSB 18V-50

Set the operating mode presetting ring 

(4)

 to

the "impact drilling" symbol.

Switching on/off

To 

start

 the power tool, press and hold the on/off switch

(11)

.

The LED 

(9)

 lights up when the on/off switch 

(11)

 is lightly

or fully pressed, meaning that the work area is illuminated in
poor lighting conditions.
To 

switch off

 the power tool, release the on/off switch 

(11)

.

Adjusting the Speed

You can adjust the speed of the power tool when it is on by
pressing in the on/off switch 

(11)

 to varying extents.

A light pressure on the on/off switch 

(11)

 results in a low ro-

tational speed. Increased pressure on the switch causes an
increase in speed.

Preselecting torque (applies to screwdriving mode)

The torque presetting ring 

(3)

 can be used to pre-select the

required torque in 20 stages. Once the set torque has been
reached, the application tool will be stopped.

Mechanical gear selection

u

Only operate the gear selector (5) when the power
tool is not in use.

First gear:

Low speed range; for working with a large drilling diameter
or for screwdriving.

Second gear:

High speed range; for working with a small drilling diameter.

u

Always push the gear selector switch as far as it will
go.

 Otherwise, the power tool may become damaged.

Temperature-dependent overload protection

When used as intended, the power tool cannot be over-
loaded. In the event of overloading or the temperature
rising/falling outside the permitted operating temperature
range, the speed will be reduced. The power tool will not run
at full speed again until the permitted operating temperature
has been reached.

Fully automatic spindle lock (Auto-Lock)

The drill spindle, and therefore the tool holder 

(1)

, are

locked when the on/off switch 

(11)

 is not pressed.

This enables screws to be screwed in even when the battery

(7)

 is empty and allows the power tool to be used as a

screwdriver.

Practical advice

u

Only apply the power tool to the screw when the tool
is switched off.

 Rotating application tools can slip off.

Before screwing larger, longer screws into hard materials, it
is advisable to pre-drill a pilot hole with the core diameter of
the thread to approx. 2/3 of the screw length.
An auxiliary tool can be used to remove the screwdriver bit
or universal bit holder.

Belt clip

You can use the belt clip 

(6)

 to hang the power tool on a belt,

for example. You then have both hands free and the power
tool is always at hand.

Maintenance and Service

Maintenance and Cleaning

u

Remove the battery from the power tool before carry-
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
moved for transport and storage.

 There is risk of injury

from unintentionally pressing the on/off switch.

u

To ensure safe and efficient operation, always keep
the power tool and the ventilation slots clean.

After-Sales Service and Application Service

Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: 

www.bosch-pt.com

The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.

Great Britain

Robert Bosch Ltd. (B.S.C.) 
P.O. Box 98 
Broadwater Park 
North Orbital Road 
Denham Uxbridge
UB 9 5HJ 
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair. 
Tel. Service: (0344) 7360109 
E-Mail: boschservicecentre@bosch.com

You can find further service addresses at:

www.bosch-pt.com/serviceaddresses

Transport

The recommended lithium-ion batteries are subject to legis-
lation on the transport of dangerous goods. The user can
transport the batteries by road without further require-
ments.

1 609 92A 7XF | (01.07.2022)

Bosch Power Tools