Bosch GSR 18 V-EC FC2 Solo 0.601.9E1.102 - Инструкция по эксплуатации - Страница 13

 English | 

13

Bosch Power Tools

1 609 92A 45S | (13.10.17)



Disconnect the plug from the power source and/or the 
battery pack from the power tool before making any 
adjustments, changing accessories, or storing power 
tools. 

Such preventive safety measures reduce the risk of 

starting the power tool accidentally.



Store idle power tools out of the reach of children and 
do not allow persons unfamiliar with the power tool or 
these instructions to operate the power tool. 

Power 

tools are dangerous in the hands of untrained users.



Maintain power tools. Check for misalignment or bin-
ding of moving parts, breakage of parts and any other 
condition that may affect the power tool’s operation. If 
damaged, have the power tool repaired before use. 

Ma-

ny accidents are caused by poorly maintained power tools.



Keep cutting tools sharp and clean. 

Properly maintained 

cutting tools with sharp cutting edges are less likely to bind 
and are easier to control.



Use the power tool, accessories and tool bits etc. in ac-
cordance with these instructions, taking into account 
the working conditions and the work to be performed. 

Use of the power tool for operations different from those 
intended could result in a hazardous situation.

Battery tool use and care



Recharge only with the charger specified by the manu-
facturer. 

A charger that is suitable for one type of battery 

pack may create a risk of fire when used with another bat-
tery pack.



Use power tools only with specifically designated bat-
tery packs. 

Use of any other battery packs may create a 

risk of injury and fire.



When battery pack is not in use, keep it away from 
other metal objects, like paper clips, coins, keys, nails, 
screws or other small metal objects, that can make a 
connection from one terminal to another. 

Shorting the 

battery terminals together may cause burns or a fire.



Under abusive conditions, liquid may be ejected from 
the battery; avoid contact. If contact accidentally oc-
curs, flush with water. If liquid contacts eyes, additio-
nally seek medical help. 

Liquid ejected from the battery 

may cause irritation or burns.

Service



Have your power tool serviced by a qualified repair per-
son using only identical replacement parts. 

This will en-

sure that the safety of the power tool is maintained.

Safety Warnings for Drills and Screwdrivers



Use auxiliary handle(s), if supplied with the tool. 

Loss 

of control can cause personal injury.



Hold power tool by insulated gripping surfaces when 
performing an operation where the cutting accessory 
or fastener may contact hidden wiring. 

Cutting accesso-

ry and fasteners contacting a live wire may make exposed 
metal parts of the power tool live and could give the opera-
tor an electric shock.



Use appropriate detectors to determine if utility lines 
are hidden in the work area or call the local utility com-

pany for assistance. 

Contact with electric lines can lead 

to fire and electric shock. Damaging a gas line can lead to 
explosion. Penetrating a water line causes property dama-
ge.



Switch off the power tool immediately when the tool 
insert jams. Be prepared for high reaction torque that 
can cause kickback. 

The tool insert jams when:

– the power tool is subject to overload or
– it becomes wedged in the workpiece.



Hold the machine with a firm grip. 

High reaction torque 

can briefly occur while driving in and loosening screws.



When working with the machine, always hold it firmly 
with both hands and provide for a secure stance. 

The 

power tool is guided more secure with both hands.



Secure the workpiece. 

A workpiece clamped with clam-

ping devices or in a vice is held more secure than by hand.



Always wait until the machine has come to a complete 
stop before placing it down. 

The tool insert can jam and 

lead to loss of control over the power tool.



Do not open the battery. 

Danger of short-circuiting.

Protect the battery against heat, e. g., against 
continuous intense sunlight, fire, water, and 
moisture. 

Danger of explosion.



In case of damage and improper use of the battery, va-
pours may be emitted. Ventilate the area and seek me-
dical help in case of complaints. 

The vapours can irritate 

the respiratory system.



Use the battery only in conjunction with your Bosch po-
wer tool. 

This measure alone protects the battery against 

dangerous overload.



The battery can be damaged by pointed objects such as 
nails or screwdrivers or by force applied externally. 

An 

internal short circuit can occur and the battery can burn, 
smoke, explode or overheat.

Product Description and Specifica-
tions

Read all safety warnings and all instruc-
tions. 

Failure to follow the warnings and inst-

ructions may result in electric shock, fire 
and/or serious injury.

While reading the operating instructions, un-

fold the graphics page for the machine and leave it open.

Intended Use

The power tool is intended for driving and loosening screws 
and for drilling in wood, metal and plastic.

The power tool can be used with an angle screw adapter, an 
eccentric adapter or a drill chuck adapter.

The light of this power tool is intended to illuminate the power 
tool’s direct area of working operation and is not suitable for 
household room illumination.

OBJ_BUCH-3365-001.book  Page 13  Friday, October 13, 2017  11:32 AM