Bosch GSR 18-2 - Инструкция по эксплуатации - Страница 11

 English | 

11

Bosch Power Tools

1 609 92A 1CM | (24.4.15)

Delivery Scope

Cordless screwdriver / Combination cordless drill.

Battery, application tools and other accessories shown or de-

scribed are not part of the standard delivery scope.
A complete overview of accessories can be found in our ac-

cessories program.

Intended Use

The machine is intended for driving in and loosening screws 

as well as for drilling in wood, metal, ceramics and plastic. 

GSB machines are additionally intended for impact drilling in 

bricks, brickwork and masonry.
The light of this power tool is intended to illuminate the power 

tool’s direct area of working operation and is not suitable for 

household room illumination.

Technical Data

The technical data of the machine are listed in the table on 

page 164.

Declaration of Conformity

We declare under our sole responsibility that the product de-

scribed under “Technical Data” is in conformity with all rele-

vant provisions of the directives 2009/125/EC (Regulation 

1194/2012), 2011/65/EU, until 19 April 2016: 

2004/108/EC, from 20 April 2016 on: 2014/30/EU, 

2006/42/EC including their amendments and complies with 

the following standards: EN 60745-1, EN 60745-2-1, 

EN 60745-2-2.

Technical file (2006/42/EC) at:

Robert Bosch GmbH, PT/ETM9,

70764 Leinfelden-Echterdingen, GERMANY

Robert Bosch GmbH, Power Tools Division

70764 Leinfelden-Echterdingen, GERMANY

20.03.2015

Noise/Vibration Information

The measured values of the machine are listed in the table on 

page 164.
Sound emission values determined according to EN 60745-2-1.
Vibration total values a

h

 (triax vector sum) and uncertainty K 

determined according to EN 60745-2-1.
The vibration level given in this information sheet has been 

measured in accordance with a standardised test given in 

EN 60745 and may be used to compare one tool with anoth-

er. It may be used for a preliminary assessment of exposure.

The declared vibration emission level represents the main ap-

plications of the tool. However if the tool is used for different 

applications, with different accessories or insertion tools or is 

poorly maintained, the vibration emission may differ. This 

may significantly increase the exposure level over the total 

working period.

An estimation of the level of exposure to vibration should also 

take into account the times when the tool is switched off or 

when it is running but not actually doing the job. This may sig-

nificantly reduce the exposure level over the total working 

period.

Identify additional safety measures to protect the operator 

from the effects of vibration such as: maintain the tool and the 

accessories, keep the hands warm, organisation of work pat-

terns.

Mounting and Operation

Recommended chargers for wireless 

charging batteries

Symbol

Meaning

Henk Becker

Executive Vice President

Engineering

Helmut Heinzelmann

Head of Product Certification

PT/ETM9

Action

Figure

Page

Removing the battery

1

165

Inserting the battery

2

165

Mounting application tools

3

165

Reversing the rotational direction

4

166

Setting the torque

5

166

Selecting the drilling position

6

167

Setting the operating mode

7

167

Gear selection, mechanical

8

167

Mounting/dismounting the belt clip

9

168

Mounting/dismounting the bit holder

10

168

Switching On and Off

11

168

Selecting Accessories

–

169

OBJ_BUCH-2389-002.book  Page 11  Friday, April 24, 2015  9:26 AM