Bosch GSR 120-LI, 2х2Ач (0.601.9G8.002) - Инструкция по эксплуатации - Страница 14

14

 | English 

1 609 92A 1SM | (11.1.16)

Bosch Power Tools

If the gear selector 

3

 cannot be pushed through to the stop, 

lightly turn the tool holder 

1

 with the insert tool.

Switching On and Off

To 

start

 the machine, press the On/Off switch 

7

 and keep it 

pressed.

The power light 

8

 lights up when the On/Off switch 

7

 is slightly 

or completely pressed, and allows the work area to be illumi-
nated when lighting conditions are insufficient.

To 

switch off

 the machine, release the On/Off switch 

7

.

To save energy, only switch the power tool on when using it.

Adjusting the Speed

The speed of the switched-on power tool can be variably ad-
justed, depending on how far the On/Off switch 

7

 is pressed.

Light pressure on the On/Off switch 

7

 results in a low rotation-

al speed. Further pressure on the switch results in an increase 
in speed.

Fully automatic spindle locking (Auto-lock)

When the On/Off switch 

7

 is not pressed, the drill spindle and 

thus the tool holder are locked.

This enables screws to be screwed in, even when the battery 
is empty and allows for the machine to be used as a screwdriv-
er.

Run-on Brake

When the On/Off switch 

7

 is released, the chuck brakes to a 

stop, thus preventing the run-on of the tool.

When driving in screws, wait until the screw is screwed in 
flush with the material and then release the On/Off switch 

7

. 

By doing so, the head of the screw does not penetrate into the 
material.

Temperature Dependent Overload Protection

When using as intended for, the power tool cannot be subject 
to overload. When the load is too high or the allowable battery 
temperature range is exceeded, the speed is reduced. The 
power tool will not run at full speed until reaching the allow-
able battery temperature.

Working Advice



Apply the power tool to the screw only when it is 
switched off. 

Rotating tool inserts can slip off.

After longer periods of working at low speed, allow the ma-
chine to cool down by running it for approx. 3 minutes at max-
imum speed with no load.

For drilling in metal, use only perfectly sharpened HSS drill 
bits (HSS = high-speed steel). The appropriate quality is guar-
anteed by the Bosch accessories program.

Before screwing larger, longer screws into hard materials, it is 
advisable to predrill a pilot hole with the core diameter of the 
thread to approx. 

2

/

3

 of the screw length.

Maintenance and Service

Maintenance and Cleaning



Before any work on the machine itself (e. g. mainte-
nance, tool change, etc.) as well as during transport 

and storage, remove the battery from the power tool. 

There is danger of injury when unintentionally actuating 
the On/Off switch.



For safe and proper working, always keep the machine 
and ventilation slots clean.

When the battery is no longer operative, please refer to an au-
thorised after-sales service agent for Bosch power tools.

After-sales Service and Application Service

Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare 
parts. Exploded views and information on spare parts can al-
so be found under:

www.bosch-pt.com

Bosch’s application service team will gladly answer questions 
concerning our products and their accessories.

In all correspondence and spare parts orders, please always 
include the 10-digit article number given on the nameplate of 
the product.

Great Britain

Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange 
the collection of a product in need of servicing or repair. 
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com

Ireland

Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888

Australia, New Zealand and Pacific Islands

Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch.com.au

OBJ_BUCH-2747-001.book  Page 14  Monday, January 11, 2016  10:46 AM