Bosch GSR 10,8-2-LI 0.601.868.100 - Инструкция по эксплуатации - Страница 20

 English | 

19

Bosch Power Tools

2 609 140 658 | (2.7.09)

Assembly

Battery Charging (see figure A)

f

Use only the battery chargers listed on the 
accessories page. 

Only these battery charg-

ers are matched to the lithium ion battery of 
your power tool.

Note: 

The battery is supplied partially charged. 

To ensure full capacity of the battery, complete-
ly charge the battery in the battery charger be-
fore using your power tool for the first time.
The lithium ion battery can be charged at any 
time without reducing its service life. Interrupt-
ing the charging procedure does not damage the 
battery.
The Li-ion battery is protected against deep dis-
charging by the “Electronic Cell Protection 
(ECP)”. When the battery is empty, the machine 
is switched off by means of a protective circuit: 
The inserted tool no longer rotates.

Do not continue to press the 
On/Off switch after the ma-

chine has been automatically switched off. 

The 

battery can be damaged.
To remove the battery 

5

 press the unlocking but-

tons 

4

 and pull out the battery downwards. 

Do 

not exert any force.

The battery is equipped with a NTC temperature 
control which allows charging only within a tem-
perature range of between 0 ° C and 45 ° C. A 
long battery service life is achieved in this man-
ner.
Observe the notes for disposal.

Changing the Tool (see figure B)

f

Before any work on the machine (e. g., 
maintenance, tool change, etc.) as well as 
during transport and storage, set the rota-
tional direction switch to the centre posi-
tion. 

Unintentional actuation of the On/Off 

switch can lead to injuries.

The drill spindle is locked when the On/Off 
switch 

7

 is not pressed. This makes quick, con-

venient and easy changing of the tool in the drill 
chuck possible.

Open the keyless chuck 

1

 by turning in rotation 

direction 

n

, until the tool can be inserted. Insert 

the tool.
Firmly tighten the collar of the keyless chuck 

1

by hand in rotation direction 

o

.

Dust/Chip Extraction

f

Dusts from materials such as lead-containing 
coatings, some wood types, minerals and 
metal can be harmful to one’s health. Touch-
ing or breathing-in the dusts can cause aller-
gic reactions and/or lead to respiratory infec-
tions of the user or bystanders.
Certain dusts, such as oak or beech dust, are 
considered as carcinogenic, especially in 
connection with wood-treatment additives 
(chromate, wood preservative). Materials 
containing asbestos may only be worked by 
specialists.
– Provide for good ventilation of the work-

ing place.

– It is recommended to wear a P2 filter-

class respirator.

Observe the relevant regulations in your 
country for the materials to be worked.

Operation

Starting Operation

Inserting the Battery

f

Use only original Bosch lithium ion batter-
ies with the voltage listed on the nameplate 
of your power tool. 

Using other batteries can 

lead to injuries and pose a fire hazard.

Note: 

Use of batteries not suitable for the ma-

chine can lead to malfunctions of or cause dam-
age to the power tool.
Set the rotational direction switch 

6

 to the cen-

tre position in order to avoid unintentional start-
ing. Insert the charged battery 

5

 into the handle 

so that it can be felt to engage and faces flush 
against the handle.

WARNING

OBJ_BUCH-970-001.book  Page 19  Thursday, July 2, 2009  11:48 AM