Bosch GSR 10,8-2-LI 0.601.868.100 - Инструкция по эксплуатации - Страница 17

16

 | English 

2 609 140 658 | (2.7.09)

Bosch Power Tools

g) If devices are provided for the connec-

tion of dust extraction and collection fa-
cilities, ensure these are connected and 
properly used. 

Use of dust collection can 

reduce dust-related hazards.

4) Power tool use and care

a) Do not force the power tool. Use the cor-

rect power tool for your application. 

The 

correct power tool will do the job better 
and safer at the rate for which it was de-
signed.

b) Do not use the power tool if the switch 

does not turn it on and off. 

Any power 

tool that cannot be controlled with the 
switch is dangerous and must be re-
paired.

c) Disconnect the plug from the power 

source and/or the battery pack from the 
power tool before making any adjust-
ments, changing accessories, or storing 
power tools. 

Such preventive safety 

measures reduce the risk of starting the 
power tool accidentally.

d) Store idle power tools out of the reach of 

children and do not allow persons unfa-
miliar with the power tool or these in-
structions to operate the power tool. 

Power tools are dangerous in the hands of 
untrained users.

e) Maintain power tools. Check for mis-

alignment or binding of moving parts, 
breakage of parts and any other condi-
tion that may affect the power tool’s op-
eration. If damaged, have the power tool 
repaired before use. 

Many accidents are 

caused by poorly maintained power tools.

f) Keep cutting tools sharp and clean. 

Prop-

erly maintained cutting tools with sharp 
cutting edges are less likely to bind and 
are easier to control.

g) Use the power tool, accessories and tool 

bits etc. in accordance with these in-
structions, taking into account the work-
ing conditions and the work to be per-
formed. 

Use of the power tool for 

operations different from those intended 
could result in a hazardous situation.

5) Battery tool use and care

a) Recharge only with the charger specified 

by the manufacturer. 

A charger that is 

suitable for one type of battery pack may 
create a risk of fire when used with anoth-
er battery pack.

b) Use power tools only with specifically 

designated battery packs. 

Use of any oth-

er battery packs may create a risk of injury 
and fire.

c) When battery pack is not in use, keep it 

away from other metal objects, like pa-
per clips, coins, keys, nails, screws or 
other small metal objects, that can make 
a connection from one terminal to anoth-
er. 

Shorting the battery terminals togeth-

er may cause burns or a fire.

d) Under abusive conditions, liquid may be 

ejected from the battery; avoid contact. 
If contact accidentally occurs, flush with 
water. If liquid contacts eyes, additional-
ly seek medical help. 

Liquid ejected from 

the battery may cause irritation or burns.

6) Service

a) Have your power tool serviced by a qual-

ified repair person using only identical 
replacement parts. 

This will ensure that 

the safety of the power tool is maintained.

Safety Warnings for Drills and 

Screwdriver

f

Hold power tool by insulated gripping sur-
faces, when performing an operation where 
the cutting accessory or fastener may con-
tact hidden wiring. 

Cutting accessory and 

fasteners contacting a “live” wire may make 
exposed metal parts of the power tool “live” 
and could give the operator an electric 
shock.

f

Use appropriate detectors to determine if 
utility lines are hidden in the work area or 
call the local utility company for assistance. 

Contact with electric lines can lead to fire 
and electric shock. Damaging a gas line can 
lead to explosion. Penetrating a water line 
causes property damage or may cause an 
electric shock.

OBJ_BUCH-970-001.book  Page 16  Thursday, July 2, 2009  11:48 AM