Bosch GSB 18-2 RE 0.601.17A.A01 - Инструкция по эксплуатации - Страница 17

1 609 929 M17 | (5.9.07)

Bosch Power Tools

16

 | English 

g) If devices are provided for the connection 

of dust extraction and collection facili-
ties, ensure these are connected and 
properly used. 

Use of dust collection can 

reduce dust-related hazards.

4) Power tool use and care

a) Do not force the power tool. Use the cor-

rect power tool for your application. 

The 

correct power tool will do the job better 
and safer at the rate for which it was de-
signed.

b) Do not use the power tool if the switch 

does not turn it on and off. 

Any power tool 

that cannot be controlled with the switch 
is dangerous and must be repaired.

c) Disconnect the plug from the power 

source and/or the battery pack from the 
power tool before making any adjust-
ments, changing accessories, or storing 
power tools. 

Such preventive safety meas-

ures reduce the risk of starting the power 
tool accidentally.

d) Store idle power tools out of the reach of 

children and do not allow persons unfa-
miliar with the power tool or these in-
structions to operate the power tool. 

Power tools are dangerous in the hands of 
untrained users.

e) Maintain power tools. Check for misalign-

ment or binding of moving parts, break-
age of parts and any other condition that 
may affect the power tool’s operation. If 
damaged, have the power tool repaired 
before use. 

Many accidents are caused by 

poorly maintained power tools.

f) Keep cutting tools sharp and clean. 

Prop-

erly maintained cutting tools with sharp 
cutting edges are less likely to bind and are 
easier to control.

g) Use the power tool, accessories and tool 

bits etc. in accordance with these instruc-
tions, taking into account the working 
conditions and the work to be performed. 

Use of the power tool for operations differ-
ent from those intended could result in a 
hazardous situation.

5) Service

a) Have your power tool serviced by a quali-

fied repair person using only identical re-
placement parts. 

This will ensure that the 

safety of the power tool is maintained.

Machine-specific 
Safety Warnings

f

Wear hearing protection when using impact 
drills. 

The influence of noise can lead to loss 

of hearing.

f

Always use the auxiliary handle supplied 
with the machine. 

Loss of control can cause 

personal injury.

f

Use appropriate detectors to determine if 
utility lines are hidden in the work area or 
call the local utility company for assistance. 

Contact with electric lines can lead to fire and 
electric shock. Damaging a gas line can lead to 
explosion. Penetrating a water line causes 
property damage or may cause an electric 
shock.

f

Switch off the power tool immediately when 
the tool insert jams. Be prepared for high re-
action torque that can cause kickback. 

The 

tool insert jams when:
— the power tool is subject to overload or
— it becomes wedged in the workpiece.

f

Hold the power tool only by the insulated 
gripping surfaces when performing an oper-
ation where the cutting tool may contact hid-
den wiring or its own cord. 

Contact with a 

“live” wire will also make exposed metal parts 
of the power tool “live” and shock the opera-
tor.

f

When working with the machine, always 
hold it firmly with both hands and provide 
for a secure stance. 

The power tool is guided 

more secure with both hands.

f

Secure the workpiece. 

A workpiece clamped 

with clamping devices or in a vice is held more 
secure than by hand.

f

Do not work materials containing asbestos. 

Asbestos is considered carcinogenic.