Bosch GO 2 (0.601.9H2.103) - Инструкция по эксплуатации - Страница 26

26

 | English

– Exert pressure on the spindle and maintain this pressure to continue using the power

tool. 

To switch it off

, stop exerting pressure on the spindle.

– Press the On/Off switch 

(4)

. 

To switch off

, release the on/off switch 

(4)

.

Temperature-dependent overload protection

In normal conditions of use, the power tool cannot be overloaded. If the power tool is
overloaded or the permitted battery temperature is exceeded, the electronics of the
power tool will switch off until the temperature returns to within the optimum operating
temperature range.

Protection against deep discharge

The lithium-ion battery is protected against deep discharge by the "Electronic Cell Pro-
tection (ECP)". When the battery is discharged, the power tool is switched off by means
of a protective circuit: The application tool no longer rotates.

Maintenance and Service

Maintenance and Cleaning

u

Before any work on the power tool (e.g. maintenance, tool change, etc.) as well
as during transport and storage, set the rotational direction switch to the middle
position. 

There is risk of injury from unintentionally pressing the on/off switch.

u

To ensure safe and efficient operation, always keep the power tool and the vent-
ilation slots clean.

If the battery is no longer working, please contact an authorised after-sales service agent
for 

Bosch

 power tools.

In order to avoid safety hazards, if the power supply cord needs to be replaced, this must
be done by 

Bosch

 or by an after-sales service centre that is authorised to repair 

Bosch

power tools.

After-Sales Service and Application Service

Our after-sales service responds to your questions concerning maintenance and repair of
your product as well as spare parts. You can find explosion drawings and information on
spare parts at: 

www.bosch-pt.com

The Bosch product use advice team will be happy to help you with any questions about
our products and their accessories.
In all correspondence and spare parts orders, please always include the 10‑digit article
number given on the nameplate of the product.

1 609 92A 6M4 | (21.05.2021)

Bosch Power Tools