Bort BSM-250 - Инструкция по эксплуатации - Страница 9

9

Corded screwdriver

INTRODUCTION

This tool is intended for drilling in wood, metal, ceramic 
and plastic as well as for screwdriving 
Read and save this instruction manual

TECHNICAL SPECIFICATIONS  

 1 

TOOL ELEMENTS  

 2 

A Switch for on/off and speed control
B Switch for changing direction of rotation
C Keyless chuck
D Ring for torque control
G Ventilation slots

SAFETY

GENERAL SAFETY INSTRUCTIONS

WARNING! Read all safety warnings and 
all instructions. 

Failure to follow the warn-

ings and instructions may result in electric 

shock, 

fi

 re and/or serious injury. Save all warnings and 

instructions for future reference. The term “power tool” 
in the warnings refers to your mains-operated (corded) 
power tool or batteryoperated (cordless) power tool.

1) WORK AREA SAFETY

a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmos-
pheres, such as in the presence of 

fl

 ammable  liquids, 

gases or dust. Power tools create sparks which may 
ignite the dust or fumes.
c) Keep children and bystanders away while operat-
ing a power tool. Distractions can cause you to lose 
control.

2) ELECTRICAL SAFETY

a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do not use any 
adapter plugs with earthed (grounded) power tools.
Unmodi

fi

  ed plugs and matching outlets will reduce risk 

of electric shock.
b) Avoid body contact with earthed or grounded surfac-
es such as pipes, radiators, ranges and refrigerators. 
There is an increased risk of electric shock if your body 
is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. 
Water entering a power tool will increase the risk of 
electric shock.
d) Do not abuse the cord. Never use the cord for carry-
ing, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or moving 
parts. Damaged or entangled cords increase the risk 
of electric shock.
e) When operating a power tool outdoors, use an ex-
tension cord suitable for outdoor use. Use of a cord 
suitable for outdoor use reduces the risk of electric 
shock.

f) If operating a power tool in a damp location is una-
voidable, use an earth leakage circuit breaker.
Use of an earth leakage circuit breaker reduces the risk 
of electric shock.

3) PERSONAL SAFETY

a) Stay alert, watch what you are doing and use com-
mon sense when operating a power tool. Do not use a 
power tool while you are tired or under the in

fl

 uence of 

drugs, alcohol or medication.
A moment of inattention while operating power tools 
may result in serious personal injury.
b) Use personal protective equipment. Always wear 
eye protection. Protective equipment such as dust 
mask, non-skid safety shoes, hard hat, or hearing 
protection used for appropriate conditions will reduce 
personal injuries.
c) Prevent unintentional starting. Ensure the switch is 
in the off-position before connecting to power source 
and/or battery pack, picking up or carrying the tool. 
Carrying power tools with your 

fi

  nger on the switch or 

energising power tools that have the switch on invites 
accidents.
d) Remove any adjusting key or wrench before turning 
the power tool on. A wrench or a key left attached to a 
rotating part of the power tool may result in personal 
injury.
e) Do not overreach. Keep proper footing and balance 
at all times. This enables better control of the power 
tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jew-
ellery. Keep your hair, clothing and gloves away from 
moving parts. Loose clothes, jewellery or long hair can 
be caught in moving parts.
g) If devices are provided for the connection of dust 
extraction and collection facilities, ensure these are 
connected and properly used. Use of dust collection 
can reduce dust-related hazards.

4) POWER TOOL USE AND CARE

a) Do not force the power tool. Use the correct power 
tool for your application. The correct power tool will do 
the job better and safer at the rate for which it was de-
signed.
b) Do not use the power tool if the switch does not turn 
it on and off. Any power tool that cannot be controlled 
with the switch is dangerous and must be repaired. 
c) Disconnect the plug from the power source and/or 
the battery pack from the power tool before making any 
adjustments, changing accessories, or storing power 
tools. Such preventive safety measures reduce the risk 
of starting the power tool accidentally.
d) Store idle power tools out of the reach of children 
and do not allow persons unfamiliar with the power tool 
or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained 
users.
e) Maintain power tools. Check for misalignment or 
binding of moving parts, breakage of parts and any 
other condition that may affect the power tool’s opera-
tion. If damaged, have the power tool repaired before 
use. Many accidents are caused by poorly maintained 
power tools.

EN