Bort BSM-250 - Инструкция по эксплуатации - Страница 11

11

APPLICATION ADVICE

•  When drilling ferrous metals
- pre-drill a smaller hole, when a large hole is required
- lubricate drill bit occasionally with oil
•  When turning in a screw at/near the cross cut end 

or an edge of wood, pre-drill a hole in order to avoid 
cracking of the wood 

•  For an optimal use of the tool a steady pressure on 

the screw is required, especially while removing

•  When screwdriving in hard wood one should pre-drill 

a hole

Your machine is double insulated in accord-
ance with EN60745; therefore no earth wire is 
required.

MAINTENANCE

Make sure that the machine is not live when 
carrying out maintenance work on the motor. 

Regularly clean the machine housing with a soft cloth, 
preferably after each use. Keep the ventilation slots 
free from dust and dirt. If the dirt does not come off 
use a soft cloth moistened with soapy water. Never use 
solvents such as petrol, alcohol, ammonia water, etc. 
These solvents may damage the plastic parts.
The machine requires no additional lubrication.
Should a fault occur, e.g. after wear of a part, please 
contact your local SBM Group dealer.

ENVIRONMENT

In order to prevent the machine from damage during 
transport, it is delivered in a sturdy packaging. Most of 
the packaging materials can be recycled. Take these 
materials to the appropriate recycling locations. Take 
your unwanted machines to your local SBM Group 
dealer. Here they will be disposed of in an environmen-
tally safe way.