Bort BAB-10,8-PX2D - Инструкция по эксплуатации - Страница 9

9

Personal safety

•  Stay alert, watch what you are doing and use common 

sense when operating a power tool. Do not use a power 
tool while you are tired or under the influence of drugs, 
alcohol or medication. A moment of inattention while 
operating power tools may result in serious personal 
injury.

•  Use personal protective equipment. Always wear eye 

protection. Protective equipment such as dust mask, 
non-skid safety shoes, hard hat, or hearing protection 
used for appropriate conditions will reduce personal 
injuries.

•  Prevent unintentional starting. Ensure the switch is in 

the off-position before connecting to power source and/
or battery pack, picking up or carrying the tool. Carrying 
power tools with your finger on the switch or energising 
power tools that have the switch on invites accidents.

•  Remove any adjusting key or wrench before turning the 

power tool on. A wrench or a key left attached to a rotat-
ing part of the power tool may result in personal injury.

•  Do not overreach. Keep proper footing and balance at 

all times. This enables better control of the power tool in 
unexpected situations.

•  Dress properly. Do not wear loose clothing or jewellery. 

Keep your hair, clothing and gloves away from mov-
ing parts. Loose clothes, jewellery or long hair can be 
caught in moving parts.

•  If devices are provided for the connection of dust extrac-

tion and collection facilities, ensure these are connected 
and properly used. Use of dust collection can reduce 
dust-related hazards.

Power tool use and care

•  Do not force the power tool. Use the correct power 

tool for your application. The correct power tool will 
do the job better and safer at the rate for which it was 
designed.

•  Do not use the power tool if the switch does not turn 

it on and off. Any power tool that cannot be controlled 
with the switch is dangerous and must be repaired.

•  Disconnect the plug from the power source and/or the 

battery pack from the power tool before making any 
adjustments, changing accessories, or storing power 
tools. Such preventive safety measures reduce the risk of 
starting the power tool accidentally.

•  Store idle power tools out of the reach of children and 

do not allow persons unfamiliar with the power tool 
or these instructions to operate the power tool. Power 
tools are dangerous in the hands of untrained users.

•  Maintain power tools. Check for misalignment or bind-

ing of moving parts, breakage of parts and any other 
condition that may affect the power tool’s operation. If 
damaged, have the power tool repaired before use. Many 
accidents are caused by poorly maintained power tools.

•  Keep cutting tools sharp and clean. Properly maintained 

cutting tools with sharp cutting edges are less likely to 
bind and are easier to control.

•  Use the power tool, accessories and tool bits etc. in 

accordance with these instructions, taking into account 
the working conditions and the work to be performed. 
Use of the power tool for operations different from 
those intended could result in a hazardous situation.

Battery tool use and care

•  Recharge only with the charger specified by the manu-

facturer. A charger that is suitable for one type of battery 
pack may create a risk of fire when used with another 
battery pack.

•  Use power tools only with specifically designated bat-

tery packs. Use of any other battery packs may create a 
risk of injury and fire.

•  When battery pack is not in use, keep it away from other 

metal objects, like paper clips, coins, keys, nails, screws 
or other small metal objects, that can make a connec-
tion from one terminal to another. Shorting the battery 
terminals together may cause burns or a fire.

•  Under abusive conditions, liquid may be ejected from 

the battery; avoid contact. If contact accidentally occurs, 
flush with water. If liquid contacts eyes, additionally seek 
medical help. Liquid ejected from the battery may cause 
irritation or burns.

Service

Have your power tool serviced by a qualified repair person 
using only identical replacement parts. This will ensure 
that the safety of the power tool is maintained.

SAFETY WARNINGS FOR SCREWDRIVERS

•  Use auxiliary handle(s), if supplied with the tool. Loss of 

control can cause personal injury.

•  Hold power tool by insulated gripping surfaces, when 

performing an operation where the cutting accessory 
may contact hidden wiring or its own cord. Cutting 
accessory contacting a “live” wire may make exposed 
metal parts of the power tool “live” and could give the 
operator an electric shock.

•  Use suitable detectors to determine if utility lines are 

hidden in the work area or call the local utility company 
for assistance. Contact with electric lines can lead to 
fire and electric shock. Damaging a gas line can lead 
to explosion. Penetrating a water line causes property 
damage or may cause an electric shock.

•  Switch off the power tool immediately when the tool 

insert jams. Be prepared for high reaction torque that 
can cause kickback. The tool insert jams when:
– the power tool is subject to overload
– it becomes wedged in the workpiece.

•  Hold the machine with a firm grip. High reaction torque 

can briefly occur while driving in and loosening screws.

•  When working with the machine, always hold it firmly 

with both hands and provide for a secure stance. The 
power tool is guided more secure with both hands.

•  Secure the workpiece. A workpiece clamped with clamp-

ing devices or in a vice is held more secure than by hand.

•  Do not open the battery. Danger of short-circuiting.
•  Protect the battery against heat, e. g., against continu-

ous intense sunlight, fire, water, and moisture. Danger 
of explosion.

•  In case of damage and improper use of the battery, 

vapours may be emitted. Ventilate the area and seek 
medical help in case of complaints. The vapours can 
irritate the respiratory system.

•  Use the battery only in conjunction with your power 

tool. This measure alone protects the battery against 
dangerous overload.