Black+Decker KR1102K - Инструкция по эксплуатации - Страница 5

5

ENGLISH

b.

Do not use the power tool if the switch 
does not turn it on and off. 

Any power tool 

that cannot be controlled with the switch is 
dangerous and must be repaired.

c.

Disconnect the plug from the power 
source and/or the battery pack from 
the power tool before making any 
adjustments, changing accessories, or 
storing power tools. 

Such preventive safety 

measures reduce the risk of starting the 
power tool accidentally.

d.  Store idle power tools out of the reach 

of children and do not allow persons 
unfamiliar with the power tool or these 
instructions to operate the power tool. 

Power tools are dangerous in the hands of 
untrained users.

e.

Maintain power tools. Check for 
misalignment or binding of moving parts, 
breakage of parts and any other condition 
that may affect the power tools operation. 
If damaged, have the power tool repaired 
before use. 

Many accidents are caused by 

poorly maintained power tools.

f.

Keep cutting tools sharp and clean. 

Properly maintained cutting tools with sharp 
cutting edges are less likely to bind and are 
easier to control.

g.

Use the power tool, accessories and 
tool bits etc. in accordance with these 
instructions, taking into account the 
working conditions and the work to 
be performed. 

Use of the power tool for 

operations different from those intended could 
result in a hazardous situation.

5.

Service

a.  Have your power tool serviced by 

a quali

fi

 ed repair person using only 

identical replacement parts. 

This will 

ensure that the safety of the power tool is 
maintained.

Additional power tool safety warnings

Warning! 

Additional safety warnings for 

drills and impact drills

♦ 

Wear ear protectors with impact drills. 

Exposure to noise can cause hearing loss.

♦ 

Use auxiliary handles supplied with the 
tool. 

Loss of control can cause personal 

injury.

♦ 

Hold power tool by insulated gripping 
surfaces when performing an operation 
where the cutting accessory may contact 

hidden wiring or its own cord. 

Cutting 

accessory contacting a “live” wire may make 
exposed metal parts of the power tool “live” 
and could give the operator an electric shock

♦ 

Never use a chisel accessory in rotary mode. 
The accessory will bind in the material and 
rotate the drill.

♦ 

Use clamps or another practical way to 
secure and support the workpiece to a stable 
platform. Holding the work by hand or against 
your body leaves it unstable and may lead to 
loss of control.

♦ 

Before drilling into walls, 

fl

 oors or ceilings, 

check for the location of wiring and pipes.

♦ 

Avoid touching the tip of a drill bit just after 
drilling, as it may be hot.

♦ 

The intended use is described in this 
instruction manual. The use of any accessory 
or attachment or performance of any 
operation with this tool other than those 
recommended in this instruction manual 
may present a risk of personal injury and/or 
damage to property.

Safety of others

♦ 

This appliance is not intended for use by 
persons (including children) with reduced 
physical, sensory or mental capabilities, 
or lack of experience and knowledge, 
unless they have been given supervision or 
instruction concerning use of the appliance by 
a person responsible for their safety.

♦ 

Children should be supervised to ensure that 
they do not play with the appliance.

Residual risks.

Additional residual risks may arise when using the 
tool which may not be included in the enclosed 
safety warnings. These risks can arise from 
misuse, prolonged use etc.

Even with the application of the relevant safety 
regulations and the implementation of safety 
devices, certain residual risks can not be avoided. 
These include:

♦ 

Injuries caused by touching any rotating/
moving parts.

♦ 

Injuries caused when changing any parts, 
blades or accessories.

♦ 

Injuries caused by prolonged use of a tool. 
When using any tool for prolonged periods 
ensure yo

u 

take regular breaks.

♦ 

Impairment of hearing.

♦ 

Health hazards caused by breathing dust 
developed when using your tool (example:-