Black+Decker KR1102K - Инструкция по эксплуатации - Страница 4

4

ENGLISH

Intended use

Your Black & Decker impact drill has been 
designed for drilling in wood, metal, plastics, and 
masonry as well as for screwdriving purposes. 
This tool is intended for consumer use only.

Safety instructions

General power tool safety warnings

Warning! Read all safety warnings and 
all instructions. 

Failure to follow the 

warnings and instructions listed below 
may result in electric shock, 

fi

 re and/or 

serious injury.

Save all warnings and instructions for future 
reference. 

The term “power tool” in the warnings 

refers to your mains operated (corded) power tool 
or battery operated (cordless) power tool.

1.  Work area safety
a.  Keep work area clean and well lit. 

Cluttered 

or dark areas invite accidents.

b.

Do not operate power tools in explosive 
atmospheres, such as in the presence of 

fl

 ammable liquids, gases or dust. 

Power 

tools create sparks which may ignite the dust 
or fumes.

c.

Keep children and bystanders away while 
operating a power tool. 

Distractions can 

cause you to lose control.

2. Electrical 

safety

a.  Power tool plugs must match the outlet. 

Never modify the plug in any way. Do 
not use any adapter plugs with earthed 
(grounded) power tools. 

Unmodi

fi

 ed plugs 

and matching outlets will reduce risk of 
electric shock.

b.

Avoid body contact with earthed or 
grounded surfaces such as pipes, 
radiators, ranges and refrigerators. 

There 

is an increased risk of electric shock if your 
body is earthed or grounded.

c.

Do not expose power tools to rain or wet 
conditions. 

Water entering a power tool will 

increase the risk of electric shock.

d.

Do not abuse the cord. Never use the cord 
for carrying, pulling or unplugging the 
power tool. Keep cord away from heat, oil, 
sharp edges or moving parts. 

Damaged or 

entangled cords increase the risk of electric 
shock.

e.

When operating a power tool outdoors, 
use an extension cord suitable for outdoor 

use. 

Use of a cord suitable for outdoor use 

reduces the risk of electric shock.

f.

If operating a power tool in a damp 
location is unavoidable, use a residual 
current device (RCD) protected supply. 

Use of an RCD reduces the risk of electric 
shock.

3. Personal 

safety

a.  Stay alert, watch what you are doing 

and use common sense when operating 
a power tool. Do not use a power tool 
while you are tired or under the in

fl

 uence 

of drugs, alcohol or medication. 

A moment 

of inattention while operating power tools may 
result in serious personal injury.

b.

Use personal protective equipment. 
Always wear eye protection. 

Protective 

equipment such as dust mask, non-skid safety 
shoes, hard hat, or hearing protection used 
for appropriate conditions will reduce personal 
injuries.

c.

Prevent unintentional starting. Ensure 
the switch is in the off-position before 
connecting to power source and/or battery 
pack, picking up or carrying the tool. 

Carrying power tools with your 

fi

 nger on the 

switch or energising power tools that have the 
switch on invites accidents.

d.

Remove any adjusting key or wrench 
before turning the power tool on. 

A wrench 

or a key left attached to a rotating part of the 
power tool may result in personal injury.

e.

Do not overreach. Keep proper footing 
and balance at all times. 

This enables 

better control of the power tool in unexpected 
situations.

f.

Dress properly. Do not wear loose clothing 
or jewellery. Keep your hair, clothing and 
gloves away from moving parts. 

Loose 

clothes, jewellery or long hair can be caught in 
moving parts.

g.

If devices are provided for the connection 
of dust extraction and collection facilities, 
ensure these are connected and properly 
used. 

Use of dust collection can reduce dust-

related hazards.

4.  Power tool use and care
a.  Do not force the power tool. Use the 

correct power tool for your application. 

The correct power tool will do the job 
better and safer at the rate for which it was 
designed.