REXEL Alpha Х - Инструкция по эксплуатации - Страница 4

Preparation before use

How to use the shredder correctly:
•  Take care not to insert fingers, ties or other objects into the 

entry slot of the shredder.

•  Try to avoid paper clips, staples, laminating materials, plastic 

bags etc. from being passed through the shredder. This will 
prevent damage to the cutters.

•  Do not shred wet paper as it can tangle in the cutters.
•  Do not shred more than the stated sheet capacity in one 

pass.

•  Do not shred continuously for more than 3 minutes at a time. 

Running the unit for too long may make the motor overheat. 
If the motor over heats, allow it to cool down for at least 30 
minutes before resuming use.

•  Do not use the “REV” (reverse) function if it’s not necessary. 

Over use of the “REV” function can result in shredded paper 
becoming jammed in the entry slot, which will adversely 
affect the performance of the shredder.

Warranty

The product is guaranteed for 24 months from the date 
of purchase – please return the unit to your retailer if you 
experience any problems. This does not affect your statutory 
rights.

Safety First

•  Please store this instruction manual in a safe place for future 

reference.

•  Please pay close attention to the safety symbols on the top of 

the shredder and operate the machine accordingly.

•  If the shredder needs cleaning, unplug the unit from the 

power socket and use a damp cloth. NB. Do not use any 
cleaning products to clean the unit.

•  Do not position the unit near to an object that radiates heat.
•  Do not place the unit in a damp environment.
•  Take care not to splash any liquid onto the machine.
•  Return the product and proof of purchase with receipt to the 

store at which it was purchased if… 
- The power cable or plug is broken. 
- The machine malfunctions because liquid was accidentally 
spilt onto the machine. 
- The shredder doesn’t operate despite following the 
guidelines in the manual.

•  Make sure the power cable isn’t a trip hazard.
•  Please ensure the power supply is compatible with the 

requirements of the machine (220-240V 50Hz).

•  To avoid risk of injury, don’t open the machine’s casing to 

attempt DIY repair. Any attempted repair by an unqualified 
person will invalidate the warranty.

m

Introduction

Thank you for choosing this Shredder from Rexel. We are sure 
it will serve you well, but please take a little time to read these 
instructions to ensure you get the best out of your machine.

Please read this instruction leaflet carefully before use.

Description of  
product parts

1

Power Cable

2

Paper entry slot

Correct operating procedure

 (fig 1)

1

  Insert plug into the AC power socket.

2

  Push the switch to the ON/AUTO position (standby mode).

3

  When not in use, push the switch to the 0 (off position).

4

  Empty the waste basket regularly to ensure the shredder 

exit does not become blocked with paper.

Technical data

Cutting Type
Shred Size
Sheet Capacity (one pass)
Entry Width
Product Dimensions
Rated Voltage/Frequency
Rated Current

Home/ Alpha

Confetti Cut
4mm x 30mm
5
223mm
323 x 155 x 365mm
220-240V~50Hz
0.8A

Ribbon Cut
7.25mm
5
220mm
285 x 142 x 344mm
220-240V~50Hz
0.8A