STATUS XS2-125E - Инструкция по эксплуатации - Страница 6

6

EN

TOOLS PARTS OVERVIEW

TOOL PARTS OVERVIEW

1.  ON/OFF switch

2.  Lock-on button

3.  Adaptor fitting

4.  Random orbital sander plate

5.  Variable speed control

6.  Front handle

OPERATION

SWITCHING ON - SWITCHING OFF

Brief activation

• 

Switching on: press and hold switch 4. 

• 

Switching off: release switch 4.

Continuous use

• 

Switching on: press ON/OFF switch 4 and lock it by button 1.

• 

Switching off: press and release ON/OFF switch 4.

• 

ADJUSTING THE CUTTING SPEED

The variable speed feature of this jigsaw enhances the сutting performance and saves the 

blade from undue wear.

• 

The variable speed control (5) is used to programme the speed of the blade. The speed 

should be adapted to the material being cut.

• 

To increase the speed turn the knob counterclockwise. To decrease the speed turn the 

knob clockwise.

Attaching the dust bag 

• 

Slide the Dust Bag onto the back of the Sander. Snap it in place using rm pressure.

• 

The collection of the dust will only work if the sandpaper has holes that line up with 

the 8 dust collection holes in the Backing Pad. 

Attaching Sandpaper to the Backing pad

The Sanding Disc is attached by Hook and Loop to the Backing Pad. Place the Sanding

Disc on the Backing Pad lining up the 8 holes so that the dust can be collected into the

Dust Bag.

OPERATION