STATUS XS2-125E - Инструкция по эксплуатации - Страница 4

4

GENERAL SAFETY RULES

EN

PERSONAL SAFETY

• 

Stay alert, watch what you are doing and use common sense when operating a 

power tool. Do not use a power tool while you are tired or under the influence of 

drugs, alcohol or medication.

A moment of inattention while operating power tools may 

result in serious personal injury.

• 

Use safety equipment. Always wear eye protection. 

Safety equipment such as 

dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate 

conditions will reduce personal injuries. 

• 

Avoid accidental starting. Ensure the switch is in the off position before plugging in. 

Carrying power tools with your finger on the switch or plugging in power tools that have 

the switch on invites accidents.

• 

Remove any adjusting key or wrench before turning the power tool on. 

A wrench or a 

key left attached to a rotating part of the power tool may result in personal injury.

• 

Do not overreach. Keep proper footing and balance at all times. 

This enables better 

control of the power tool in unexpected situations.

• 

Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and 

gloves away from moving parts.

Loose clothes, jewellery or long hair can be caught in 

moving parts.

• 

If devices are provided for the connection of dust extraction and collection facilities, 

ensure these are connected and properly used.

Use of these devices can reduce dust 

related hazards.

POWER TOOL USE AND CARE

• 

Do not force the power tool. Use the correct power tool for your application. 

The 

correct power tool will do the job better and safer at the rate for which it was designed.

• 

Do not use the power tool if the switch does not turn it on and off.

 Any power tool 

that cannot be controlled with the switch is dangerous and must be repaired.

• 

Disconnect the plug from the power source before making any adjustments, 

changing accessories, or storing power tools. 

Such preventive safety measures reduce 

the risk of starting the power tool accidentally.

• 

Store idle power tools out of the reach of children and do not allow persons 

unfamiliar with the power tool or these instructions to operate the power tool. 

Power tools are dangerous in the hands of untrained users.

• 

Maintain power tools. Check for misalignment or binding of moving parts, breakage 

of parts and any other condition that may affect the power tools operation. If 

damaged, have the power tool repaired before use. 

Many accidents are caused by 

poorly maintained power tools. 

• 

Keep cutting tools sharp and clean.

 Properly  maintained  cutting  tools  with sharp  

cutting  edges  are  less  likely  to  bind and are easier to control.