Metabo FSX 200 - Инструкция по эксплуатации - Страница 8

ENGLISH

en

8

Original instructions

We, being solely responsible, hereby declare that 

these orbital sanders, identified by type and serial 

number *1), meet all relevant requirements of 

directives *2) and standards *3). Technical 

documents for *4) - see page 3.

The machine is suitable for dry sanding of flat and 

elliptical surfaces, wood, plastics, non-ferrous 

metals, sheet metal and similar filled and painted 

surfaces.
The user bears sole responsibility for damage 

caused by improper use.
Generally accepted accident prevention 

regulations and the enclosed safety information 

must be observed.

For your own protection and for the 

protection of your electrical tool, pay 

attention to all parts of the text that are 

marked with this symbol!

WARNING

 – Reading the operating instruc-

tions will reduce the risk of injury.

WARNING Read all safety warnings and 

instructions.

Failure to follow all safety warn-

ings and instructions may result in electric shock, 

fire and/or serious injury.

Keep all safety instructions and information for 

future reference.

Pass on your electrical tool only together with these 

documents.

Pull the plug out of the socket before making any 

adjustments, changing tools, carrying out 

maintenance or cleaning.
Secure the workpiece against slipping, e.g. with the 

help of clamping devices.

Wear ear protectors when working for long 

periods of time.

 High noise levels over a 

prolonged period of time may affect your hearing.
Hold the machine from the handles provided.

Reducing dust exposure:

Some of the dust created using this power tool 

may contain substances known to cause 

cancer, allergic reaction, respiratory disease, birth 

defects or other reproductive harm. Some 

examples of these substances are: lead (from lead-

based paints), crystalline silica (from bricks cement, 

etc.), additives for wood treatment (chromate, wood 

preservative), some types of wood (like oak and 

beech dust), metals, asbestos.

The risk from exposure to such substances will 

depend on how long the user or nearby persons are 

being exposed.

Do not let particles enter the body.

To reduce exposure to these substances: work in a 

well ventilated area and wear protective equipment, 

such as dust masks that are specially designed to 

filter out microscopic particles.
Observe the relevant guidelines for your material, 

staff, application and place of application (e.g. 

occupational health and safety regulations, 

disposal).
Collect the generated particles at the source, avoid 

deposits in the surrounding area.
Use only suitable accessories. In this way, fewer 

particles enter the environment in an uncontrolled 

manner. 
Use a suitable extraction unit.
Reduce dust exposure with the following measures:

- Do not direct the escaping particles and the 

exhaust air stream at yourself or nearby persons 

or on dust deposits.

- Use an extraction unit and/or air purifiers.

- Ensure good ventilation of the workplace and 

keep it clean using a vacuum cleaner. Sweeping 

or blowing stirs up dust.

- Vacuum or wash protective clothing. Do not blow, 

beat or brush.

See page 2.

1 Sanding disc

2 Support  plate

3 On/off switch

4 Dust collection box

5 Cleaning flap

6 Fluted filter

Before plugging in, check to see that the rated 

mains voltage and mains frequency, 

as stated on the rating label, match your power 

supply.

6.1 Installation of sanding disc

Simple attachment and removal thanks to the 

velcro-type fastening. 

Simply press on the sanding disc such that the 

holes in the sanding disc (1) are aligned with the 

support plate (2).

7.1 Switching On and Off

Switching on: 

Move switch (3) to "

I

" position. 

Switching off: 

Move switch (3) to "

O

" position. 

1. Conformity Declaration

2. Specified Use

3. General Safety Instructions

4. Special Safety Instructions

5. Overview

6. Commissioning

7. Use