Makita GA4540C - Инструкция по эксплуатации - Страница 13

13 

Operation with wire cup brush   
(optional accessory) 

CAUTION: 

• 

Check operation of brush by running tool with no 
load, insuring that no one is in front of or in line with 
brush. 

• 

Do not use brush that is damaged, or which is out 
of balance. Use of damaged brush could increase 
potential for injury from contact with broken brush 
wires. 

Fig.20 

Unplug tool and place it upside down allowing easy 
access to spindle. Remove any accessories on spindle. 
Thread wire cup brush onto spindle and tighten with 
supplied wrench. When using brush, avoid applying too 
much pressure which causes over bending of wires, 
leading to premature breakage. 

Operation with wire wheel brush   
(optional accessory) 

CAUTION: 

• 

Check operation of wire wheel brush by running 
tool with no load, insuring that no one is in front of 
or in line with the wire wheel brush. 

• 

Do not use wire wheel brush that is damaged, or 
which is out of balance. Use of damaged wire 
wheel brush could increase potential for injury from 
contact with broken wires. 

• 

ALWAYS use guard with wire wheel brushes, 
assuring diameter of wheel fits inside guard. Wheel 
can shatter during use and guard helps to reduce 
chances of personal injury. 

Fig.21 

Unplug tool and place it upside down allowing easy 
access to spindle. Remove any accessories on spindle. 
Thread wire wheel brush onto spindle and tighten with 
the wrenches. 
When using wire wheel brush, avoid applying too much 
pressure which causes over bending of wires, leading to 
premature breakage. 

MAINTENANCE 

CAUTION: 

• 

Always be sure that the tool is switched off and 
unplugged before attempting to perform inspection 
or maintenance. 

• 

Never use gasoline, benzine, thinner, alcohol or 
the like. Discoloration, deformation or cracks may 
result. 

Fig.22 

The tool and its air vents have to be kept clean. 
Regularly clean the tool's air vents or whenever the 
vents start to become obstructed. 
 

To maintain product SAFETY and RELIABILITY, repairs, 
carbon brush inspection and replacement, any other 
maintenance or adjustment should be performed by 
Makita Authorized Service Centers, always using Makita 
replacement parts. 

OPTIONAL ACCESSORIES 

CAUTION: 

• 

These accessories or attachments are 
recommended for use with your Makita tool 
specified in this manual. The use of any other 
accessories or attachments might present a risk of 
injury to persons. Only use accessory or 
attachment for its stated purpose. 

If you need any assistance for more details regarding 
these accessories, ask your local Makita Service Center. 

• 

Dust cover attachment