Makita DGA504Z - Инструкция по эксплуатации - Страница 5

5 

Model DGA404 

Work mode : surface grinding with normal side 
grip 
Vibration emission (a

h,AG

) : 4.5 m/s

2 

Uncertainty (K) : 1.5 m/s

2 

Work mode : surface grinding with anti vibration 
side grip 
Vibration emission (a

h,AG

) : 4.0 m/s

2 

Uncertainty (K) : 1.5 m/s

2 

Work mode: disc sanding 
Vibration emission (a

h,DS

) : 2.5 m/s

2

 or less 

Uncertainty (K) : 1.5 m/s

2 

Model DGA454, DGA504 

Work mode : surface grinding with normal side 
grip 
Vibration emission (a

h,AG

) : 6.5 m/s

2 

Uncertainty (K) : 1.5 m/s

2 

Work mode : surface grinding with anti vibration 
side grip 
Vibration emission (a

h,AG

) : 6.0 m/s

2 

Uncertainty (K) : 1.5 m/s

2 

Work mode: disc sanding 
Vibration emission (a

h,DS

) : 2.5 m/s

2

 or less 

Uncertainty (K) : 1.5 m/s

2 

ENG902-1 

• 

The declared vibration emission value has been 
measured in accordance with the standard test 
method and may be used for comparing one tool 
with another. 

• 

The declared vibration emission value may also be 
used in a preliminary assessment of exposure. 

• 

The declared vibration emission value is used for 
main applications of the power tool. However if the 
power tool is used for other applications, the 
vibration emission value may be different. 

WARNING: 

• 

The vibration emission during actual use of the 
power tool can differ from the declared emission 
value depending on the ways in which the tool is 
used. 

• 

Be sure to identify safety measures to protect the 
operator that are based on an estimation of 
exposure in the actual conditions of use (taking 
account of all parts of the operating cycle such as 
the times when the tool is switched off and when it 
is running idle in addition to the trigger time). 
 

ENH101-18 

For European countries only 

EC Declaration of Conformity 

Makita declares that the following Machine(s): 

Designation of Machine:   
Cordless Angle Grinder 
Model No./ Type: DGA404,DGA454,DGA504 

Conforms to the following European Directives: 

2006/42/EC 

They are manufactured in accordance with the following 
standard or standardized documents: 

EN60745 

The technical file in accordance with 2006/42/EC is 
available from: 

Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium 
 

13.3.2014 

000331 

Yasushi Fukaya 

Director 

Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium 

GEA010-1 

General Power Tool Safety Warnings 

WARNING Read all safety warnings and all 

instructions.

 Failure to follow the warnings and instructions 

may result in electric shock, fire and/or serious injury. 

Save all warnings and instructions for 
future reference. 

GEB059-4 

CORDLESS GRINDER SAFETY 
WARNINGS 

Safety Warnings Common for Grinding, Sanding, 
Wire Brushing, or Abrasive Cutting-Off Operations: 

1. 

This power tool is intended to function as a 
grinder, sander, wire brush or cut-off tool. 
Read all safety warnings, instructions, 
illustrations and specifications provided with 
this power tool.

 Failure to follow all instructions 

listed below may result in electric shock, fire 
and/or serious injury. 

2. 

Operations such as polishing are not 
recommended to be performed with this 
power tool.

 Operations for which the power tool 

was not designed may create a hazard and cause 
personal injury.   

3. 

Do not use accessories which are not 
specifically designed and recommended by 
the tool manufacturer.

 Just because the 

accessory can be attached to your power tool, it 
does not assure safe operation.