Einhell CE-CB 18/254 Li (2093301) - Инструкция по эксплуатации - Страница 20

GB

- 20 -

synthetic polishing bonnet. Make sure that 

the synthetic polishing bonnet is free of any 

foreign bodies.

2.  Remove the polish layer in the same order in 

which you applied the polishing agent to the 

paintwork. Be sure to follow the instructions 

issued for using the waxing and polishing 

agent.

7.  Replacing the power cable

Danger! Information on the charger

If the power cable for this equipment is damaged, 

it must be replaced by the manufacturer or its 

after-sales service or similarly trained personnel 

to avoid danger.

8.  Cleaning, maintenance and 

ordering of spare parts

Danger!

Always pull out the battery pack before starting 

any cleaning work.

8.1 Cleaning

• 

 Keep all safety devices, air vents and the 

motor housing free of dirt and dust as far as 

possible. Wipe the equipment with a clean 

cloth or blow it with compressed air at low 

pressure.

• 

 We recommend that you clean the device  

immediately each time you have finished 

using it.

• 

 Clean the equipment regularly with a moist 

cloth and some soft soap. Do not use 

cleaning agents  or solvents; these could at-

tack the plastic parts of the equipment. Ensu-

re that no water can seep into the device. The 

ingress of water into an electric tool increases 

the risk of an electric shock.

• 

Wash the polishing bonnets only by hand and 

let them air-dry. 

• 

When the polishing machine is not being 

used it should be stored face up with the po-

lishing bonnet removed so that the polishing 

disk can dry and retain its original shape.

8.2 Maintenance

There are no parts inside the equipment which  

require additional maintenance.

8.3 Ordering replacement parts:

Please quote the following data when ordering 

replacement parts:

• 

 Type of machine

• 

 Article number of the machine

• 

 Identification number of the machine

• 

 Replacement part number of the part required

For our latest prices and information please go to 

www.isc-gmbh.info

9.  Disposal and recycling

The equipment is supplied in packaging to pre-

vent it from being damaged in transit. The raw 

materials in this packaging can be reused or 

recycled. The equipment and its accessories are 

made of various types of material, such as metal 

and plastic. Never place defective equipment in 

your household refuse. The equipment should 

be taken to a suitable collection center for proper 

disposal. If you do not know the whereabouts of 

such a collection point, you should ask in your 

local council o

ffi

  ces. 

10. Storage

Store the equipment and accessories out of 

children’s reach in a dark and dry place at above 

freezing temperature. The ideal storage tempe-

rature is between 5 and 30 °C. Store the electric 

tool in its original packaging.

11. Fault

The machine does not work

Check that the battery is charged and whether 

the charging unit is working. If the equipment will 

not work in spite of the voltage supply being OK, 

please send it to the customer service address 

below.

Anl_CE_CB_18_254 Li_SPK9.indb   20

Anl_CE_CB_18_254 Li_SPK9.indb   20

25.04.2019   13:44:44

25.04.2019   13:44:44