Ryobi RSW1240G - Инструкция по эксплуатации - Страница 3

Safety, performance, and dependability have been given 
top priority in the design of your scroll saw.

INTENDED USE

The scroll saw is used for cutting wood and plastics.
The scroll saw is basically a curve-cutting machine. The 
product can also be used for straight cutting, beveling and 
angle cutting operation.
The product is intended for consumer use and should only 
be used as described above and is not intended for any 
other purpose.

GENERAL SAFETY WARNINGS

 WARNING

When using electric tools, basic safety precautions 

VKRXOG DOZD\V EH IROORZHG WR UHGXFH WKH ULVN RI ¿UH

electric shock and personal injury. Read all these 
instructions before attempting to operate this product 
and save these instructions.

Ŷ

Keep work area clear.

 Cluttered areas and benches 

invite injuries.

Ŷ

Consider work area environment.

 Do not expose 

tools to rain. Do not use tools in damp or wet locations. 

Keep work area well lit. Do not use tools in the presence 
of flammable liquids or gases.

Ŷ

Guard against electric shock.

 Avoid body contact with 

earthed or grounded surfaces (e.g., pipes, radiators, 
ranges, refrigerators).

Ŷ

Keep other persons away.

 Do not let persons, 

especially children, be involved in the work, touch the 

tool or the extension cord, and keep them away from 
the work area.

Ŷ

Store idle tools.

 When not in use, tools should be 

stored in a dry locked-up place, out of reach of children.

Ŷ

Do not force the tool.

 It will do the job better and safer 

at the rate for which it was intended.

Ŷ

Use the right tool.

 Do not force small tools to do the 

job of a heavy duty tool. Do not use tools for purposes 

not intended, for example, do not use circular saws to 
cut tree limbs or logs.

Ŷ

Dress properly.

 Do not wear loose clothing or 

jewellery, they can be caught in moving parts. Non-

skid footwear is recommended when working outdoors. 
Wear protective hair covering to contain long hair.

Ŷ

Use protective equipment.

 Use safety glasses. Use 

face or dust mask if working operations create dust.

Ŷ

Connect dust extraction equipment.

 If the tool is 

provided for the connection of dust extraction and 

collecting equipment, ensure these are connected and 
properly used.

Ŷ

Do not abuse the cord.

 Never yank the cord to 

disconnect it from the socket. Keep the cord away from 
heat, oil and sharp edges.

Ŷ

Secure work.

 Where possible, use clamps or a vice to 

hold the work. It is safer than using your hand.

Ŷ

Do not overreach.

 Keep proper footing and balance 

at all times.

Ŷ

Maintain tools with care.

 Keep cutting tools sharp 

and clean for better and safer performance. Follow 

instruction for lubricating and changing accessories. 

Inspect tool cords periodically and if damaged, have 

them repaired by an authorized service facility. Inspect 

extension cords periodically and replace if damaged. 
Keep handles dry, clean and free from oil and grease.

Ŷ

Disconnect tools.

 When not in use, before servicing 

and when changing accessories such as blades, bits 
and cutters, disconnect tools from the power supply.

Ŷ

Remove adjusting keys and wrenches.

 Form the 

habit of checking to see that keys and adjusting 

wrenches are removed from the tool before turning it 
on.

Ŷ

Avoid unintentional starting.

 Ensure switch is in “off” 

position when plugging in.

Ŷ

Use outdoor extension leads.

 When the tool is used 

outdoors, use only extension cords intended for outdoor 
use and so marked.

Ŷ

Stay alert.

 Watch what you are doing, use common 

sense and do not operate the tool when you are tired, 

under the influence of any drugs, alcohol, or medication 
that could affect your ability to use the tool properly.

Ŷ

Check damaged parts.

 Before further use of tool, it 

should be carefully checked to determine that it will 

operate properly and perform its intended function. 

Check for alignment of moving parts, binding of moving 

parts, breakage of parts, mounting and any other 

conditions that may affect its operation. A guard or 

other part that is damaged should be properly repaired 

or replaced by an authorized service centre unless 

otherwise indicated in this instruction manual. Have 

defective switches replaced by an authorized service 
centre.

Ŷ

Do not use the tool if the switch does not turn it 
on and off.

Ŷ

Warning.

 The use of any accessory or attachment 

other than the one recommended in this instruction 
manual may present a risk of personal injury.

Ŷ

Have your tool repaired by a qualified person.

 This 

electric tool complies with the relevant safety rules. 

Repairs should only be carried out by qualified persons 

using original spare parts otherwise this may result in 
considerable danger to the user.

SCROLL SAW SAFETY WARNINGS

Ŷ

Do not operate the scroll saw until it is completely 

assembled and installed according to the instructions.

Ŷ

The scroll saw must be securely fastened to a 

workbench. If there is any tendency for the workbench 

to move during operation, workbench must be fastened 

to the floor.

Ŷ

Disconnect the scroll saw from the power source when 

installing or replacing the blades.

Ŷ

Blade teeth should be pointing down.

English

1

EN

FR

DE

ES

IT

NL

PT

DA

SV

FI

NO

RU

PL

CS

HU

RO

LV

LT

ET

HR

SL

SK

EL

TR

UK