Ryobi R18RS-0 (5133002637) - Инструкция по эксплуатации - Страница 3

Safety, performance, and dependability have been given 
top priority in the design of your reciprocating saw.

INTENDED USE

The reciprocating saw is intended to be used only by 
adults who have read and understood the instructions and 
warnings in this manual and can be considered responsible 
for their actions. With appropriate blades 

fi

 tted,  the 

reciprocating saw is designed to cut wood, plastic, drywall 
and metal up to the depth described in the speci

fi

 cation 

table. The reciprocating saw is designed for handheld 
use; it is not to be mounted onto a workbench unless 
speci

fi

 c instructions are given about how to do this by the 

manufacturer of the product.
Do not use the product in any way other than those stated 
for intended use.

 WARNING

Read all safety warnings and all instructions.

 Failure 

to follow the warnings and instructions may result in 
electric shock, 

fi

 re and/or serious injury.

Save all warnings and instructions for future reference

.

RECIPROCATING SAW SAFETY WARNINGS

■

Hold power tool by insulated gripping surfaces, 
when performing an operation where the cutting 
accessory may contact hidden wiring. 

Cutting 

accessory contacting a “live” wire may make exposed 
metal parts of the power tool “live” and could give the 
operator an electric shock.

■

Protect your lungs. 

Wear a dust mask if operation is 

dusty.

RESIDUAL RISKS

Even when the reciprocating saw is used as prescribed, it is 
still impossible to completely eliminate certain residual risk 
factors. The following hazards may arise and the operator 
should pay special attention to avoid the following:

■

Injury caused by vibration

–

Use the lowest speed setting which achieves the 
task. Limit exposure. See risk reduction.

■

Injury caused by dust

–

Wear eye protection at all times. Wear appropriate 
dust mask with suitable filters that can protect 
against particles from the material being worked on. 
Do not eat, drink, or smoke in the work area. Ensure 
adequate ventilation.

■

Electric shock

–

The blade may contact hidden wiring causing 
parts of the product to become live. Always hold 
the product by the designated handles and take 
care when blind cutting into walls and floors where 
cables may be hidden.

NOTE: 

When working on walls, ceilings, or floors, take 

care to avoid electric cables and gas or water pipes. 
The product must be operated with both hands.

■

Injury from contact with the cutting blade

–

The blades are very sharp and will become hot 
during use. Wear gloves when changing blades. 
Keep hands away from the cutting area at all times. 
Clamp the workpiece whenever possible.

■

Injury caused by noise

–

Prolonged exposure to noise will increase the risk 
of hearing damage, and the effects are cumulative. 
When using power tools for any extended period of 
time, wear hearing protection.

RISK REDUCTION

It has been reported that vibrations from handheld tools 
may contribute to a condition called Raynaud’s Syndrome 
in certain individuals. Symptoms may include tingling, 
numbness and blanching of the 

fi

 ngers, usually apparent 

upon exposure to cold. Hereditary factors, exposure to 
cold and dampness, diet, smoking, and work practices 
are all thought to contribute to the development of these 
symptoms. There are measures that can be taken by the 
operator to possibly reduce the effects of vibration:

■

Keep your body warm in cold weather. When operating 
the product, wear gloves to keep the hands and wrists 
warm. It is reported that cold weather is a major factor 
contributing to Raynaud’s Syndrome.

■

After each period of operation, exercise to increase 
blood circulation.

■

Take frequent work breaks. Limit the amount of 
exposure per day.

If you experience any of the symptoms of this condition, 
immediately discontinue use and see your doctor about 
these symptoms.

 WARNING

Injuries may be caused or aggravated by prolonged use 
of a tool. When using any tool for prolonged periods, 
ensure you take regular breaks.

KNOW YOUR PRODUCT

See page 79.

1. Blade
2. Shoe assembly
3. Blade clamp
4.  Toolless blade change system
5. Hex key
6. Battery port
7. Switch trigger
8. Lock-off button

OPERATION

ADJUSTING THE SHOE ASSEMBLY

■

The product has a shoe assembly that pivots up and 
down in both directions to ensure the shoe is flat 
against the cutting surface at all times. The adjustable 
shoe also slides in and out, which allows for the use of 
the blade teeth at different positions on the blade.

■

Press the saw blade into the saw blade holder up to the 
stop. Make sure that the saw blade is fixed securely.

1

 English 

|

EN

FR

DE

ES

IT

NL

PT

DA

SV

FI

NO

RU

PL

CS

HU

RO

LV

LT

ET

HR

SL

SK

EL

TR

UK