Makita JR3061T - Инструкция по эксплуатации - Страница 4

4 ENGLISH

ENGLISH (Original instructions)

SPECIFICATIONS

Model:

JR3061T

Length of stroke

32 mm

Strokes per minute

0 - 3,000 min

-1

Max. cutting capacities

Pipe 

(with 300 mm blade)

130 mm

Wood 

(with 305 mm blade)

255 mm

Overall length

487 mm

Net weight

3.8 kg

Safety class

/II

• 

Due to our continuing program of research and development, the specifications herein are subject to change 

without notice.

• 

Specifications may differ from country to country.

• 

Weight according to EPTA-Procedure 01/2014

Intended use

The tool is intended for sawing wood, plastic, metal and 

building materials with a strong impact. It is suitable for 

straight and curved cutting.

Power supply

The tool should be connected only to a power supply of 

the same voltage as indicated on the nameplate, and 

can only be operated on single-phase AC supply. They 

are double-insulated and can, therefore, also be used 

from sockets without earth wire.

Noise

The typical A-weighted noise level determined accord-

ing to EN62841-2-11:

Sound pressure level (L

pA

) : 88 dB(A)

Sound power level (L

WA

) : 99 dB (A)

Uncertainty (K) : 3 dB(A)

WARNING:

Wear ear protection.

Vibration

The vibration total value (tri-axial vector sum) deter-

mined according to EN62841-2-11:

Work mode: cutting boards

Vibration emission (a

h,B

) : 18.5 m/s

2

Uncertainty (K) : 1.5 m/s

2

Work mode: cutting wooden beams

Vibration emission (a

h,WB

) 16.5 m/s

2

Uncertainty (K) : 2.0 m/s

2

NOTE:

 The declared vibration emission value has 

been measured in accordance with the standard test 

method and may be used for comparing one tool with 

another.

NOTE:

 The declared vibration emission value 

may also be used in a preliminary assessment of 

exposure.

WARNING:

 The vibration emission during actual 

use of the power tool can differ from the declared 

emission value depending on the ways in which the 

tool is used.

WARNING:

 Be sure to identify safety measures 

to protect the operator that are based on an estima-

tion of exposure in the actual conditions of use (taking 

account of all parts of the operating cycle such as 

the times when the tool is switched off and when it is 

running idle in addition to the trigger time).

EC Declaration of Conformity

For European countries only

The EC declaration of conformity is included as Annex A 

to this instruction manual.

SAFETY WARNINGS

General power tool safety warnings

WARNING:

Read all safety warnings, instruc-

tions, illustrations and specifications provided 

with this power tool.

 Failure to follow all instructions 

listed below may result in electric shock, fire and/or 

serious injury.

Save all warnings and instruc

-

tions for future reference.

The term "power tool" in the warnings refers to your 

mains-operated (corded) power tool or battery-operated 

(cordless) power tool.