Makita DJR187RTE - Инструкция по эксплуатации - Страница 5

5 ENGLISH

Save all warnings and instruc-

tions for future reference.

The term "power tool" in the warnings refers to your 

mains-operated (corded) power tool or battery-operated 

(cordless) power tool.

Cordless recipro saw safety 

warnings

1. 

Hold power tool by insulated gripping sur-

faces, when performing an operation where 

the cutting accessory may contact hidden wir-

ing.

 Cutting accessory contacting a “live” wire may 

make exposed metal parts of the power tool “live” 

and could give the operator an electric shock.

2. 

Use clamps or another practical way to secure 

and support the workpiece to a stable plat-

form.

 Holding the work by hand or against your 

body leaves it unstable and may lead to loss of 

control.

3. 

Always use safety glasses or goggles. 

Ordinary eye or sun glasses are NOT safety 

glasses.

4. 

Avoid cutting nails. Inspect workpiece for any 

nails and remove them before operation.

5. 

Do not cut oversize workpiece.

6. 

Check for the proper clearance beyond the 

workpiece before cutting so that the blade will 

not strike the floor, workbench, etc.

7. 

Hold the tool firmly.

8. 

Make sure the blade is not contacting the 

workpiece before the switch is turned on.

9. 

Keep hands away from moving parts.

10. 

Do not leave the tool running. Operate the tool 

only when hand-held.

11. 

Always switch off and wait for the blade to 

come to a complete stop before removing the 

blade from the workpiece.

12. 

Do not touch the blade or the workpiece imme-

diately after operation; they may be extremely 

hot and could burn your skin.

13. 

Do not operate the tool at no-load 

unnecessarily.

14. 

Always use the correct dust mask/respirator 

for the material and application you are work-

ing with.

15. 

Some material contains chemicals which may 

be toxic. Take caution to prevent dust inhala-

tion and skin contact. Follow material supplier 

safety data.

SAVE THESE INSTRUCTIONS.

WARNING:

DO NOT let comfort or familiarity 

with product (gained from repeated use) replace 

strict adherence to safety rules for the subject 

product. MISUSE or failure to follow the safety 

rules stated in this instruction manual may cause 

serious personal injury.

Important safety instructions for 

battery cartridge

1. 

Before using battery cartridge, read all instruc-

tions and cautionary markings on (1) battery 

charger, (2) battery, and (3) product using battery.

2. 

Do not disassemble battery cartridge.

3. 

If operating time has become excessively 

shorter, stop operating immediately. It may 

result in a risk of overheating, possible burns 

and even an explosion.

4. 

If electrolyte gets into your eyes, rinse them out 

with clear water and seek medical attention right 

away. It may result in loss of your eyesight.

5. 

Do not short the battery cartridge:

(1) 

Do not touch the terminals with any con-

ductive material.

(2) 

Avoid storing battery cartridge in a con-

tainer with other metal objects such as 

nails, coins, etc.

(3) 

Do not expose battery cartridge to water 

or rain.

A battery short can cause a large current 

flow, overheating, possible burns and even a 

breakdown.

6. 

Do not store the tool and battery cartridge in 

locations where the temperature may reach or 

exceed 50 °C (122 °F).

7. 

Do not incinerate the battery cartridge even if 

it is severely damaged or is completely worn 

out. The battery cartridge can explode in a fire.

8. 

Be careful not to drop or strike battery.

9. 

Do not use a damaged battery.

10. 

The contained lithium-ion batteries are subject 

to the Dangerous Goods Legislation require-

ments. 

For commercial transports e.g. by third parties, 

forwarding agents, special requirement on pack-

aging and labeling must be observed.

For preparation of the item being shipped, consult

-

ing an expert for hazardous material is required. 

Please also observe possibly more detailed 

national regulations. 

Tape or mask off open contacts and pack up the 

battery in such a manner that it cannot move 

around in the packaging.

11. 

Follow your local regulations relating to dis-

posal of battery.

SAVE THESE INSTRUCTIONS.

CAUTION:

Only use genuine Makita batteries.

Use of non-genuine Makita batteries, or batteries that 

have been altered, may result in the battery bursting 

causing fires, personal injury and damage. It will also 

void the Makita warranty for the Makita tool and charger.

Tips for maintaining maximum 

battery life

1. 

Charge the battery cartridge before completely 

discharged. Always stop tool operation and 

charge the battery cartridge when you notice 

less tool power.