Einhell PXC GE-GS 18 - Инструкция по эксплуатации - Страница 17

GB

- 17 -

Danger!

Sound and vibration

Sound and vibration values were measured in 

accordance with EN 60745.

L

pA

 sound pressure level  ..................... 73,9 dB(A)

K

pA

 uncertainty  ............................................. 3 dB

L

WA

 sound power level   ....................... 84,9 dB(A)

K

WA

 uncertainty ............................................. 3 dB

Wear ear-mu

ff

 s.

The impact of noise can cause damage to hea-

ring.

Total vibration values (vector sum of three direc-

tions) determined in accordance with EN 60745.

Vibration emission value a

h

 = 21,251 m/s

2

K uncertainty = 1.5 m/s

2

The speci

fi

 ed vibration value was established in 

accordance with a standardized testing method. It 

may change according to how the electric equip-

ment is used and may exceed the speci

fi

 ed value 

in exceptional circumstances.

The speci

fi

 ed vibration value can be used to 

compare the equipment with other electric power 

tools.

The speci

fi

 ed vibration value can be used for initi-

al assessment of a harmful e

ff

 ect.

Keep the noise emissions and vibrations to a 

minimum.

• 

 Only use appliances which are in perfect wor-

king order.

• 

 Service and clean the appliance regularly.

• 

 Adapt your working style to suit the appliance.

• 

 Do not overload the appliance.

• 

 Have the appliance serviced whenever ne-

cessary.

• 

 Switch the appliance off when it is not in use.

• 

 Wear protective gloves.

Caution!

Residual risks

Even if you use this electric power tool in 

accordance with instructions, certain resi-

dual risks cannot be rules out. The following 

hazards may arise in connection with the 

equipment’s construction and layout:

1.   Lung damage if no suitable protective dust 

mask is used.

2.   Damage to hearing if no suitable ear protec-

tion is used.

3.   Health damage caused by hand-arm vib-

rations if the equipment is used over a pro-

longed period or is not properly guided and 

maintained.

5.  Before starting the equipment

Warning!

Always remove the battery pack before making 

adjustments to the equipment.

5.1 Changing the saw blade (Fig. 3a)

Warning!

Switch o

ff

  the universal saw and pull out the bat-

tery pack each time before doing any work on the 

machine and changing the blade.

Open the cover (Fig. 3a/Item A) by pressing it to-

gether slightly at the front and then swinging it up.

Turn the ring (B) on the blade holder (4) as 

shown in Fig. 3a until the blade (6) lets itself be 

slipped into the slot of the blade holder (4). When 

you now let go of the ring (B) again, the ring (B) 

should return to its starting position. If this fails to 

happen, try turning the ring (B) by hand into its 

starting position.

Now pull on the blade to check whether it is tightly 

seated in the holder.

5.2 Fitting the branch jaw clamp (Fig. 3b/3c)

The branch jaw clamp (Fig. 1/Item 5) helps you to 

guide the equipment when cutting branches. The 

equipment can be used either with or without the 

branch jaw clamp.

To 

fi

 t the branch jaw clamp, press the lock release 

(Fig. 3b/Item A) and push the branch jaw clamp 

onto the soleplate from above. Make sure that the 

two pins (Fig. 3c/Item A) are correctly seated in 

the related recesses (Fig. 3c/Item B) of the so-

leplate. Then check that the branch jaw clamp is 

securely seated.

5.3 Charging the Li battery pack (Fig. 4-5)

1.  Remove the battery pack (A) from the handle, 

pressing the pushlock button (B) downwards 

to do so.

2.  Check that your mains voltage is the same as 

that marked on the rating plate of the battery 

charger. Insert the power plug of the charger 

(C) into the socket outlet. The green LED will 

Anl_GE_GS_18_Li_SPK7.indb   17

Anl_GE_GS_18_Li_SPK7.indb   17

27.09.2016   11:39:14

27.09.2016   11:39:14