Bosch GSA 1300 PCE (060164E200) - Инструкция по эксплуатации - Страница 12

12

 | English 

1 609 92A 0CN | (8.8.13)

Bosch Power Tools

Safety Warnings for Sabre Saws



Hold power tool by insulated gripping surfaces, when 
performing an operation where the cutting accessory 
may contact hidden wiring or its own cord. 

Cutting ac-

cessory contacting a “live” wire may make exposed metal 
parts of the power tool “live” and could give the operator an 
electric shock.



Keep hands away from the sawing range. Do not reach 
under the workpiece. 

Contact with the saw blade can 

lead to injuries.



Apply the machine to the workpiece only when 
switched on. 

Otherwise there is danger of kickback when 

the cutting tool jams in the workpiece.



When sawing, the adjustable footplate 2 must always 
faces against the workpiece. 

The saw blade can become 

wedged and lead to loss of control over the machine.



When the cut is completed, switch off the machine and 
then pull the saw blade out of the cut only after it has 
come to a standstill. 

In this manner you can avoid kick-

back and can place down the machine securely.



Use only undamaged saw blades that are in perfect con-
dition. 

Bent or dull saw blades can break, negatively influ-

ence the cut, or lead to kickback.



Do not brake the saw blade to a stop by applying side 
pressure after switching off. 

The saw blade can be dam-

aged, break or cause kickback.



Clamp material well. Do not support the workpiece 
with your hand or foot. Do not touch objects or the floor 
with the the saw running. 

Danger of kickback.



Use suitable detectors to determine if utility lines are 
hidden in the work area or call the local utility company 
for assistance. 

Contact with electric lines can lead to fire 

and electric shock. Damaging a gas line can lead to explo-
sion. Penetrating a water line causes property damage or 
may cause an electric shock.



When working with the machine, always hold it firmly 
with both hands and provide for a secure stance. 

The 

power tool is guided more secure with both hands.



Secure the workpiece. 

A workpiece clamped with clamp-

ing devices or in a vice is held more secure than by hand.



Always wait until the machine has come to a complete 
stop before placing it down. 

The tool insert can jam and 

lead to loss of control over the power tool.



Products sold in GB only

: Your product is fitted with an 

BS 1363/A approved electric plug with internal fuse 
(ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should 
be cut off and an appropriate plug fitted in its place by an 
authorised customer service agent. The replacement plug 
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible 
shock hazard and should never be inserted into a mains 
socket elsewhere.

Products sold in AUS and NZ only

: Use a residual current 

device (RCD) with a rated residual current of 30 mA or 
less.

Product Description and 
Specifications

Read all safety warnings and all instruc-
tions. 

Failure to follow the warnings and in-

structions may result in electric shock, fire 
and/or serious injury.

While reading the operating instructions, unfold the graphics 
page for the machine and leave it open.

Intended Use

The machine is intended for sawing wood, plastic, metal and 
building materials while resting firmly on the workpiece. It is 
suitable for straight and curved cuts. When using the appropri-
ate bimetal saw blades, it is possible to cut flush to the work-
piece surface. The saw blade recommendations must be ob-
served.

The light of this power tool is intended to illuminate the power 
tool’s direct area of working operation and is not suitable for 
household room illumination.

Product Features

The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.

1

Saw blade *

2

Adjustable footplate

3

Saw blade holder

4

Locking sleeve for saw blade

5

Stroke rod

6

Utility hook

7

On/Off switch

8

Lock-off button for On/Off switch

9

Footplate release button

10

“PowerLight”

11

Handle (insulated gripping surface)

* Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories 
can be found in our accessories program.

Technical Data

Sabre saw

GSA 1300 PCE

Article number

3 601 F4E 2..

Rated power input

W

1 300

Stroke rate at no load n

0

min

-1

0 – 2 900

Tool holder

SDS

Orbital action



Constant electronic control



Stroke

mm

28

Cutting depth, max.
– in  wood
– in non-alloy steel
– Pipe diameter

mm
mm
mm

220

20

175

Weight according to 
EPTA-Procedure 01/2003

kg

4.1

Protection class

/

II

The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.

OBJ_BUCH-1366-005.book  Page 12  Thursday, August 8, 2013  10:18 AM