Bort BRS-18LI-FD - Инструкция по эксплуатации - Страница 9

9

gerous in the hands of untrained users .
e) Maintain power tools . Check for misalignment or binding 
of moving parts, breakage of parts and any other condi-
tion that may affect the power tool’s operation . If damaged, 
have the power tool repaired before use . Many accidents are 
caused by poorly maintained power tools .
f )  Keep cutting tools sharp and clean . Properly maintained
cutting tools with sharp cutting edges are less likely to bind 
and are easier to control .
g)  Use the power tool, accessories and tool bits etc . in ac-
cordance with these instructions, taking into account the 
working conditions and the work to be performed . Use of 
the power tool for operations different from those intended 
could result in a hazardous situation .

Battery tool use and care

• Recharge only with the charger specified by the manu-

facturer . A charger that is suitable for one type of battery 
pack may create a risk of fire when used with another 
battery pack .

• Use power tools only with specifically designated bat-

tery packs . Use of any other battery packs may create a 
risk of injury and fire .

• When battery pack is not in use, keep it away from other 

metal objects, like paper clips, coins, keys, nails, screws 
or other small metal objects, that can make a connec-
tion from one terminal to another . Shorting the battery 
terminals together may cause burns or a fire .

• Under abusive conditions, liquid may be ejected from 

the battery; avoid contact . If contact accidentally occurs, 
flush with water . If liquid contacts eyes, additionally seek 
medical help . Liquid ejected from the battery may cause 
irritation or burns .

5) Service

a) Have your power tool serviced by a qualified repair person 
using only identical replacement parts . This will ensure that 
the safety of the power tool is maintained .

4. Special safety instructions

• Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory may 
contact hidden wiring or its own cord . Cutting accessory 
contacting a “live” wire may make exposed metal parts of 
the power tool “live” and could give the operator an electric 
shock .
• Keep hands away from the sawing range . Do not reach
under the workpiece . Contact with the saw blade can lead 
to injuries .
• Apply the machine to the workpiece only when switched 
on . Otherwise there is danger of kickback when the cutting 
tool jams in the workpiece .
• Pay attention that the Soleplate (5) rests securely on the
material while sawing . A jammed saw blade can break or 
lead to kickback .
• When the cut is completed, switch off the machine and
then pull the saw blade out of the cut only after it has come 
to a standstill . In this manner you can avoid kickback and 
can place down the machine securely . 
• Use only sharp, flawless saw blades . Bent or unsharp saw 
blades can break or cause kickback .

• Do not brake the saw blade to a stop by applying side
pressure after switching off . The saw blade can be dam-
aged, break or cause kickback .
• Use suitable detectors to determine if utility lines are hid-
den in the work area or call the local utility company for 
assistance . Contact with electric lines can lead to fire and 
electric shock . Damaging a gas line can lead to explosion . 
Penetrating a water line causes property damage or may 
cause an electric shock .
• Secure the workpiece . A workpiece clamped with clamp-
ing devices or in a vice is held more secure than by hand .
• Keep your workplace clean . Blends of materials are par-
ticularly dangerous . Dust from light alloys can burn or ex-
plode .
• Always wait until the machine has come to a complete
stop before placing it down . The tool insert can jam and 
lead to loss of control over the power tool .
• Never use the machine with a damaged cable . Do not
touch the damaged cable and pull the mains plug when 
the cable is damaged while working . Damaged cables in-
crease the risk of an electric shock .

SAFETY WARNINGS FO BATTERY TOOL

• Use auxiliary handle(s), if supplied with the tool . Loss of 

control can cause personal injury .

• Hold power tool by insulated gripping surfaces, when 

performing an operation where the cutting accessory 
may contact hidden wiring or its own cord . Cutting 
accessory contacting a “live” wire may make exposed 
metal parts of the power tool “live” and could give the 
operator an electric shock .

• Use suitable detectors to determine if utility lines are 

hidden in the work area or call the local utility company 
for assistance . Contact with electric lines can lead to 
fire and electric shock . Damaging a gas line can lead 
to explosion . Penetrating a water line causes property 
damage or may cause an electric shock .

• Switch off the power tool immediately when the tool 

insert jams . Be prepared for high reaction torque that 
can cause kickback . The tool insert jams when: 
– the power tool is subject to overload
– it becomes wedged in the workpiece .

• Hold the machine with a firm grip . High reaction torque 

can briefly occur while driving in and loosening screws .

• When working with the machine, always hold it firmly 

with both hands and provide for a secure stance . The 
power tool is guided more secure with both hands .

• Secure the workpiece . A workpiece clamped with 

clamping devices or in a vice is held more secure than 
by hand .

• Do not open the battery . Danger of short-circuiting .
• Protect the battery against heat, e . g ., against continu-

ous intense sunlight, fire, water, and moisture . Danger 
of explosion .

• In case of damage and improper use of the battery, 

vapours may be emitted . Ventilate the area and seek 
medical help in case of complaints . The vapours can 
irritate the respiratory system .

• Use the battery only in conjunction with your power 

tool . This measure alone protects the battery against 
dangerous overload .

• The battery can be damaged by pointed objects such as