Bort BRS-12LI-G - Инструкция по эксплуатации - Страница 10

10

not allow persons unfamiliar with the power tool or these 

instructions to operate the power tool . Power tools are 

dangerous in the hands of untrained users .

•  Maintain power tools . Check for misalignment or bin-

ding of moving parts, breakage of parts and any other 

condition that may affect the power tool’s operation . If 

damaged, have the power tool repaired before use . Many 

accidents are caused by poorly maintained power tools .

•  Keep cutting tools sharp and clean . Properly maintained 

cutting tools with sharp cutting edges are less likely to 

bind and are easier to control .

•  Use the power tool, accessories and tool bits etc . in ac-

cordance with these instructions, taking into account the 

working conditions and the work to be performed . Use of 

the power tool for operations different from those inten-

ded could result in a hazardous situation .

Battery tool use and care

•  Recharge only with the charger specified by the manu-

facturer . A charger that is suitable for one type of bat-

tery pack may create a risk of fire when used with an-

other battery pack .

•  Use power tools only with specifically designated bat-

tery packs . Use of any other battery packs may create a 

risk of injury and fire .

•  When battery pack is not in use, keep it away from other 

metal objects, like paper clips, coins, keys, nails, screws 

or other small metal objects, that can make a connec-

tion from one terminal to another . Shorting the battery 

terminals together may cause burns or a fire .

•  Under abusive conditions, liquid may be ejected from 

the battery; avoid contact . If contact accidentally oc-

curs, flush with water . If liquid contacts eyes, addition-

ally seek medical help . Liquid ejected from the battery 

may cause irritation or burns .

Service

Have your power tool serviced by a qualified repair per-

son using only identical replacement parts . This will en-

sure that the safety of the power tool is maintained .

SPECIAL SAFETY INSTRUCTIONS

•  Hold power tool by insulated gripping surfaces, when 

performing an operation where the cutting accessory 

may contact hidden wiring or its own cord . Cutting 

accessory contacting a “live” wire may make exposed 

metal parts of the power tool “live” and could give the 

operator an electric shock .

•  Keep hands away from the sawing range . Do not reach 

under the workpiece . Contact with the saw blade can 

lead to injuries .

•  Apply the machine to the workpiece only when 

switched on . Otherwise there is danger of kickback 

when the cutting tool jams in the workpiece .

•  • Pay attention that the Soleplate (5) rests securely on 

the material while sawing . A jammed saw blade can 

break or lead to kickback .

•  When the cut is completed, switch off the machine and 

then pull the saw blade out of the cut only after it has 

come to a standstill . In this manner you can avoid kick-

back and can place down the machine securely . 

•  Use only sharp, flawless saw blades . Bent or unsharp 

saw blades can break or cause kickback .

•  Do not brake the saw blade to a stop by applying side 

pressure after switching off . The saw blade can be dam-

aged, break or cause kickback .

•  Use suitable detectors to determine if utility lines are 

hidden in the work area or call the local utility company 

for assistance . Contact with electric lines can lead to fire 

and electric shock . Damaging a gas line can lead to ex-

plosion . Penetrating a water line causes property dam-

age or may cause an electric shock .

•  Secure the workpiece . A workpiece clamped with 

clamping devices or in a vice is held more secure than 

by hand .

•  Keep your workplace clean . Blends of materials are par-

ticularly dangerous . Dust from light alloys can burn or 

explode .

•  Always wait until the machine has come to a complete 

stop before placing it down . The tool insert can jam and 

lead to loss of control over the power tool .

•  Never use the machine with a damaged cable . Do not 

touch the damaged cable and pull the mains plug 

when the cable is damaged while working . Damaged 

cables increase the risk of an electric shock .

Safety Warnings fo Battery tool

•  Use auxiliary handle(s), if supplied with the tool . Loss of 

control can cause personal injury .

•  Hold power tool by insulated gripping surfaces, when 

performing an operation where the cutting accessory 

may contact hidden wiring or its own cord . Cutting 

accessory contacting a “live” wire may make exposed 

metal parts of the power tool “live” and could give the 

operator an electric shock .

•  Use suitable detectors to determine if utility lines are 

hidden in the work area or call the local utility company 

for assistance . Contact with electric lines can lead to fire 

and electric shock . Damaging a gas line can lead to ex-

plosion . Penetrating a water line causes property dam-

age or may cause an electric shock .

•  Switch off the power tool immediately when the tool 

insert jams . Be prepared for high reaction torque that 

can cause kickback . The tool insert jams when 

– the power tool is subject to overload

– it becomes wedged in the workpiece .

•  Hold the machine with a firm grip . High reaction torque 

can briefly occur while driving in and loosening screws .

•  When working with the machine, always hold it firmly 

with both hands and provide for a secure stance . The 

power tool is guided more secure with both hands .

•  Secure the workpiece . A workpiece clamped with 

clamping devices or in a vice is held more secure than 

by hand .

•  Do not open the battery . Danger of short-circuiting .

•  Protect the battery against heat, e . g ., against continu-

ous intense sunlight, fire, water, and moisture . Danger 

of explosion .

•  In case of damage and improper use of the battery, 

vapours may be emitted . Ventilate the area and seek 

medical help in case of complaints . The vapours can ir-

ritate the respiratory system .

•  Use the battery only in conjunction with your power 

tool . This measure alone protects the battery against 

dangerous overload .