Keenetic Peak AC2600 (KN-2710) - Инструкция по эксплуатации - Страница 5

Certification Information

Keenetic Limited hereby declares that this device 

is in compliance with all relevant provisions of directives 

2014/53/EU, 2009/125/EC, and 2011/65/EU. Details of the 

original EU declaration may be found at 

keenetic.com

 within 

details on specific model pages. 

This device complies with EU radiation exposure limits set 

forth for an uncontrolled environment. This equipment 

should be installed and operated with a minimum distance 

of 20 cm between the antennas and a person’s body. The 

frequency and the maximum transmitted power for your 

device, per the requirements of the EU are listed below:

2400-2483,5 MHz: 20 dBm;  

5150-5350 MHz: 23 dBm;  

5470-5725 MHz: 30 dBm. 

If your Keenetic device is 5 GHz capable* it will support DFS 

and TPC functionality while operating in the 5 GHz band. 

All Keenetic devices operating in the 5150 to 5350 MHz 

frequency range (channels 36 - 64)* are restricted to indoor 

use.

*  Check specific product details of your Keenetic device for 

applicability.

Disposal

In accordance with European directives, your Keenetic device, 

including the power adapter and cables may not be disposed 

of with general household waste. Consult your local authority 

or your supplier for information about disposal. 

Notice

When you use your Keenetic device (including when you 

connect your Keenetic device the first time), Keenetic Limited 

will process certain personal data about you, e.g., service 

tag, serial number, model name, software version, and 

IP address of your Keenetic device. For more information, 

please go to 

keenetic.com/legal

.

If you are in the European Union / European Economic Area, 

Keenetic GmbH will process certain personal data about 

you, e.g., service tag, serial number, model name, software 

version, and IP address of your Keenetic device. Please read 

our Device Privacy Policy for the European Union / European 

Economic Area at 

keenetic.com/legal

.

What should I do if I forget my Web Interface page 

password?

To create a new password, please follow the instructions to 

restore the factory settings on your Keenetic device in the 

question below.

How do I reset/restore the original factory settings 

on my Keenetic device?

Make sure that your Keenetic device is connected to a power 

supply. Press and hold the Reset Button 

B

 until the Status 

LED 

C

 begins to blink rapidly, release the Reset Button and 

wait while your device restarts. 

Important: 

After restoring factory settings, you will need to 

reconfigure your Internet connection and re-add extenders 

to your Mesh Wi-Fi system.

Support

For technical support or other information, please visit  

help.keenetic.com

.

Safety Instructions

■

 Your Keenetic device is ONLY for indoor use — NEVER use 

it outside.

■

Before use, remove protective labels from your Keenetic 

device, and ensure vents are unblocked.

■

Never use your Keenetic device in an enclosed space, and 

ensure that the Keenetic-supplied power adapter is always 

easily accessible.

■

ONLY use a Keenetic-supplied power adapter — cease 

to use any damaged adapter IMMEDIATELY.

■

Your Keenetic device and its power adapter contain 

no user-serviceable parts — DO NOT OPEN.

■

Keep your Keenetic device away from water, excessive 

humidity or heat, and direct sunlight.

■

Your Keenetic device can be safely wall-mounted using two 

screws, firmly attached, on any wall surface strong enough 

to support 4 times the device’s weight.

Device Warranty

For the most up to date Warranty Information, please visit 

our website 

keenetic.com/legal

.

Your Keenetic device comes with a non-transferable 3-year 

warranty from the documented date of purchase (including 

your 2-year European Limited Warranty). Valid claims 

in case of a defect will be honored subject to local legal 

requirements.

English

English

8

9