D-Link DIR-636L 802.11nk (DIR-636L) - Инструкция по эксплуатации - Страница 90

86

D-Link DIR-636L User Manual

Section 3 - Configuration

This Wizard helps you add wireless devices to the wireless network.

The wizard will either display the wireless network settings to guide you through manual configuration, prompt you to enter the 

PIN for the device, or ask you to press the configuration button on the device. If the device supports Wi-Fi Protected Setup and has a 

configuration button, you can add it to the network by pressing the configuration button on the device and then the on the router 

within 60 seconds. The status LED on the router will flash three times if the device has been successfully added to the network.

There are several ways to add a wireless device to your network. A “registrar” controls access to the wireless network. A registrar 

only allows devices onto the wireless network if you have entered the PIN, or pressed a special Wi-Fi Protected Setup button on the 

device. The router acts as a registrar for the network, although other devices may act as a registrar as well.

Click to start the wizard and skip to page 44.

Add Wireless 

Station:

Add Wireless 

Device Wizard:

You can also simply press the WPS button on the side of the router, and then press the WPS 

button on your wireless client to automatically connect without logging into the router. 

Refer to page 109 for more information.

WPS Button

WPS Button