D-Link DIR-636L 802.11nk (DIR-636L) - Инструкция по эксплуатации - Страница 68

64

D-Link DIR-636L User Manual

Section 3 - Configuration

PPPoE

Select 

PPPoE

 from the drop-down menu.

Enter  the  PPPoE  account  settings  supplied  by  your  Internet 

provider (ISP). 

Select 

Static

 if your ISP assigned you the IP address, subnet mask, 

gateway, and DNS server addresses. In most cases, select 

Dynamic

.

Enter the IP address (Static PPPoE only).

Enter your PPPoE user name.

Enter your PPPoE password and then retype the password in the 

next box.

Enter the ISP Service Name (optional).

Select either 

Always-on

, 

On-Demand

, or 

Manual

.

Enter a maximum idle time during which the Internet connection 

is  maintained  during  inactivity.  To  disable  this  feature,  enable 

Auto-reconnect.

Maximum Transmission Unit - you may need to change the MTU for 

optimal performance with your specific ISP. 1492 is the default MTU.

Select either 

Obtain.DNS.server.address.automatically

 or 

Use.

the.following.DNS.Address

.

Enter the primary and secondary DNS server addresses. 

Enter the LAN (local) IPv6 address for the router. 

Displays the Router’s LAN Link-Local Address.

Check to enable the Autoconfiguration feature.

My IPv6 Connection:

PPPoE:

Address Mode:

IP Address:

User Name:

Password:

Service Name:

Reconnection Mode:

Maximum Idle Time: 

MTU:

IPv6 DNS Settings:

Primary/Secondary DNS 

Address:

LAN IPv6 Address:

LAN Link-Local Address:

Enable Autoconfiguration: