Tefal X-plorer Serie 60 Allergy Kit (RG7447WH) - Инструкция по эксплуатации - Страница 39

39

5.

IS THERE A PROBLEM WITH YOUR APPLIANCE?

According to model:

•  

The charger is getting hot:

4

  This is perfectly normal. The vacuum cleaner can remain permanently connected to the charger 

without any risk.

• The charger is connected but your appliance is not charging:

  - The charger is incorrectly attached to the appliance or is faulty.

4

  Check that the charger is properly connected or contact an Approved Services Centre to change 

the charger.

• Your appliance stops during use:

  - Your appliance may be overheating.

4

  Stop the appliance and leave cool for at least 1 hour.

4

  If it overheats on repeated occasions, contact the Approved Services Centre.

• The appliance stopped after the charge light was flashing:

  - The appliance has run out of battery charge.

4

  Recharge the vacuum cleaner.

• The power-brush is not working properly or makes a noise:

  - The rotating brush or hose are obstructed.

4

  Stop the vacuum cleaner and clean them.

  - The brush is worn.

4

  Contact an Approved Service Centre to change the brush.

  - The belt is worn.

4

  Contact an Approved Service Centre to change the belt.

• The power-brush stops during vacuuming:

  - The safety function has been triggered.

4

  Stop the vacuum cleaner. Check that nothing is obstructing the rotation of the brush; if there is an 

obstruction, remove it and clean the power-brush, then turn on the vacuum cleaner.

• Your vacuum cleaner is not vacuuming as well, is making noise, whistling:

  - The intake channel is partially blocked.

4

  Unblock it

  - The dust collector is full.



Empty it and clean it.

  - The dust collector is not properly fitted.

4

  Re-position it correctly.

  - The intake head is clogged.

4

  Remove the power-brush and clean it.

  - The protective foam filter is saturated.

4

  Clean it. 

EN