Ardesto RVC-S1200B - Инструкция по эксплуатации - Страница 72

EN

72

6. Troubleshooting

Fault indication by 
light flashing

Fault name Fault description

Solution

The red light flashes 
twice, and 1 beep can 
be heard.

Left wheel 
fault

The left wheel does not 
rotate, as the left wheel is 
overloaded.

Please check whether the left 
wheel of the machine gets 
entangled.

The red light flashes 3 
times, and 1 beep can 
be heard.

Right wheel 
fault

The right wheel does not 
rotate, as the right wheel 
is overloaded.

Please check whether the right 
wheel of the machine gets 
entangled.

The red light flashes 5 
times, and 1 beep can 
be heard.

Front wheel 
fault

The front wheel is stuck 
and does not rotate.

Please check whether the front 
wheel gets entangled.

The red light flashes 6 
times, and 1 beep can 
be heard.

Floor 
inspection 
fault or 
suspension 
fault

Cliff or the sensor is dirty 
or the machine is off the 
floor.

Please check whether the sensor 
at the bottom of the machine is 
blocked abnormally or do not 
leave the machine in a suspended 
state.

The red light flashes 7 
times, and 1 beep can 
be heard.

The battery 
charge 
level is low

The battery charge level 
has reached its lower 
limit (other than recharge 
voltage threshold).

Please allow the machine to 
return to the charging post for 
recharge.

The red light flashes 8 
times, and 1 beep can 
be heard.

Front 
collision 
fault

The front shell collision 
switch does not reset.

Please check whether the 
machine collision buffer is normal 
or loose.

The red light flashes 9 
times, and 1 beep can 
be heard.

Middle 
sweeper 
fault

The rolling brush is stuck. Please check whether the middle 

sweeping brush of the machine is 
entangled by any foreign object.

The red light flashes 
10 times, and 1 beep 
can be heard.

Side 
sweeping 
fault

The side brush is stuck.

Please check whether the side 
sweeping brush of the machine is 
entangled by any foreign object.

The red light flashes 
11 times, and 1 beep 
can be heard.

Wall 
inspection 
fault

There is a problem with 
the wall inspection.

Please check whether the wall 
inspection transparent window 
is blocked or interfered by any 
foreign object.

The red light flashes 
12 times, and 1 beep 
can be heard.

Fan fault

The fan does not rotate, 
and the current is large.

Please check whether the fan 
blades are loose or are entangled 
by any foreign object.

The red light flashes 
14 times, and 1 beep 
can be heard.

Charging 
fault

The battery is damaged 
or the battery cable is not 
in contact.

Please check whether the 
charging dock power supply is 
normal or replace the battery.

Tip:

 If you can't eliminate the corresponding faults with the above methods, please contact 

our customer service staff in time.