Роботы-пылесосы Polaris PVCR 1028 WI-FI IQ Home - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
37
8.
If necessary, detach the brushes.
9.
Wipe the brushes with a piece of cloth preliminary soaked in hot water and well wrung. Perform the cleaning
each time after vacuuming.
10.
Given any damage to the lateral brushes, timely replace them.
CLEANING THE SENSORS AND CONTACT LEADS
- Make sure to keep the frontal wheel free from debris accrual.
- To remove dust from the fall sensors, wipe them with a piece of soft cloth provided exertion no mechanical
impact. (Fig. 22)
- Use a piece of dry soft cloth to wipe the contact leads at the vacuum cleaner bottom, or on the base (Fig.
23)
- Disconnect the electric battery at a long-term idleness of the device.
Any works regarding cleaning external parts of the vacuum cleaner are beyond the warranty service.
TROUBLESHOOTING
The Table contains the most usual problems which may arise during operation the device. Depending on a
defect reason, you can hear 1 to 4 beeps.
#
Problem
Indication
Sound signal
Elimination method
1
The frontal wheel gets
stuck
The indicator
illuminates in
red
Beeps once
Clean the wheel, and restart
the vacuum cleaner
2
A lateral brush gets
stuck
The indicator
illuminates in red
Beeps twice
Clean the lateral brush, and
restart the vacuum cleaner
3
The filter gets clogged
The indicator
illuminates in red
Beeps trice
Clean the dust bag and filters
from dirt
4
No rotation of the
main brush
The indicator
illuminates in red
Beeps 4 times
Detach and clean the main
brush
5
Bumper gets jammed
Th indicator
flashes in red
Beeps twice
Check whether the bumper
can freely travel on the
front, and on lateral sides. At
absence of the free travel,
eliminate the reason for
jamming (any debris
ingested). Given
impossibility of elimination
of the reason for the bumper
jam-up without
disassembling the bumper,
contact Polaris ASC.
6
The fall sensors are
contaminated, one
end of the vacuum
cleaner is lifted
Th indicator
flashes in red
Beeps trice
Move the vacuum cleaner
into a light space, clean the
fall sensors from
contamination.
7
The vacuum cleaner
cannot return to the
base.
Th indicator
flashes in red
Beeps
4 times
Make sure that there is no
obstacles between the base
and the vacuum cleaner.
Wipe the contact leads of
the vacuum cleaner and the
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
