DREAME Robot Vacuum-Mop F9 White (RVS5-WH0) - Инструкция по эксплуатации - Страница 11

9

How to Use

3. Cleaning Mode

Four cleaning modes are available in the  app: 

Quiet, Standard, Strong and Turbo. The default mode is Standard.

4. Pausing/Sleep Mode

• 

Press any button to pause the vacuum-mop during cleaning.

• 

The vacuum-mop will automatically enter sleep mode after 10 minutes of 

inactivity, then the power and charging indicators will go off. To wake up 

the vacuum-mop, press any button.

Note:  When  the  vacuum-mop  is  paused,  placing  it  onto  the  charging  dock  will  end  the 

current cleaning task.

2. Start Cleaning

Upon activation, the vacuum-mop will methodically clean each room in an 

S-shape pattern, then finish by cleaning along edges and walls to ensure a 

thorough job. When the vacuum-mop is done cleaning, it will automatically 

return to the charging dock to recharge.

Note: 

•  Please fully charge and start from the charging dock before cleaning. Don't move the 

robot and charging dock when the robot  is working.

•  If the battery is too low , the robot will automatically return to the  dock to charge.It 

will resume unfinished cleaning tasks after charging to the appropriate power.

Note:  Activating  Spot  Clean  mode  will  end  the  current  cleaning  task  of  the  vacuum-

mop.

5. Spot Clean mode

When the vacuum-mop is in standby mode or paused, press and hold the 

button       for 3 seconds to start Spot Clean mode. In this mode, it will clean 

a square-shaped area of 1.5 ×1.5 meters directly around the vacuum-mop. 

When the spot cleaning is done, the vacuum-mop will automatically return 

to its original location and shut off.

1. Turn On/Off

Press and hold the button       to turn on the vacuum-mop. Once the power 

indicator turns solid white, the vacuum-mop is in standby mode. To turn off 

the vacuum-mop, press and hold the button       while the vacuum-mop is 

stationary. Turning off the vacuum-mop will end the current cleaning task.