Worx WX678.9 - Инструкция по эксплуатации - Страница 6

Oscillating Tool                     EN

6

1.

HYPERLOCK™ ACCESSORY CLAMPING 
LEVER

2.

ON/OFF SWITCH

3.

VARIABLE SPEED DIAL

4.

VENTING SLOTS

5.

UNIVERSAL-FIT ACCESSORY INTERFACE*

6.

SMALLER FLANGE (FOR OTHER BRANDS' 
SANDING PADS)

7.

FLANGE

*Works with other oscillating tool brands' 
accessories. 
The following compatible brands are 
trademarks owned by third parties which may 
be registered by their respective owners: 
Bosch

®

, Black & Decker

®

, Makita

®

 and Fein

®

. 

Not all the accessories illustrated or described 
are included in standard delivery.

TECHNICAL DATA

Type   

 WX678 WX678.9 (6-designation of 

machinery, representative of high frequency 

oscillation tool)

WX678

WX678.9

Voltage

20V  Max**

Oscillations speed

5000-20000 /min

Oscillations angle

3.2°

Tool weight 

1.4 KG

**Voltage measured without workload. Initial 
battery voltage reaches maximum of 20 volts. 
Nominal voltage is 18 volts.

NOISE INFORMATION

A weighted sound pressure

L

pA

:  76dB(A)

A weighted sound power

L

wA

: 87dB(A)

K

PA

& K

WA

3.0dB (A)

Wear ear protection when sound 

pressure is over

80dB(A) 

VIBRATION INFORMATION

Vibration total values (triax vector sum) determined 

according to EN 60745:

Typical weighted 

vibration

Vibration emission value 

a

h

 = 3.57m/s²

Uncertainty K = 1.5m/s²

The declared vibration total value may be used for 

comparing one tool with another, and may also be 

used in a preliminary assessment of exposure.

WARNING: 

The vibration emission value 

during actual use of the power tool can differ 

from the declared value depending on the ways in 

which the tool is used dependant on the following 

examples and other variations on how the tool is used:

How the tool is used and the materials being cut or 

drilled.

The tool being in good condition and well 

maintained

The use the correct accessory for the tool and 

ensuring it is sharp and in good condition.

The tightness of the grip on the handles and if any 

anti vibration accessories are used.

And the tool is being used as intended by its design 

and these instructions. 

This tool may cause hand-arm vibration 

syndrome if its use is not adequately managed.

WARNING:

 To be accurate, an estimation of 

exposure level in the actual conditions of use 

should take account of all parts of the operating cycle 

such as the times when the tool is switched off and 

when it is running idle but not actually doing the job. 

This may significantly reduce the exposure level over 

the total working period.

Helping to minimize your vibration exposure risk.

ALWAYS use sharp chisels, drills and blades.

Maintain this tool in accordance with these 

instructions and keep well lubricated (where 

appropriate).

If the tool is to be used regularly then invest in anti 

vibration accessories.

Avoid using tools in temperatures of 10

o

C or less.

Plan your work schedule to spread any high vibration 

tool use across a number of days.