Skil 1470 - Инструкция по эксплуатации - Страница 8

8

b) 

do not use the power tool if the switch does not turn 

it on and off.

 Any power tool that cannot be controlled 

with the switch is dangerous and must be repaired.

c) 

disconnect the plug from the power source and/or 

the battery pack from the power tool before making 

any adjustments, changing accessories, or storing 

power tools.

 Such preventive safety measures reduce 

the risk of starting the power tool accidentally.

d) 

store idle power tools out of the reach of children 

and do not allow persons unfamiliar with the power 

tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained 

users.

e) 

Maintain power tools. Check for misalignment or 

binding of moving parts, breakage of parts and any 

other condition that may affect the power tool’s 

operation. If damaged, have the power tool repaired 

before use.

 Many accidents are caused by poorly 

maintained power tools.

f) 

Keep cutting tools sharp and clean.

 Properly 

maintained cutting tools with sharp cutting edges are less 

likely to bind and are easier to control.

g) 

Use the power tool, accessories and tool bits etc., in 

accordance with these instructions, taking into 

account the working conditions and the work to be 

performed.

 Use of the power tool for operations different 

from those intended could result in a hazardous situation.

5) serVICe

a) 

Have your power tool serviced by a qualified repair 

person using only identical replacement parts.

 This 

will ensure that the safety of the power tool is maintained.

saFeTY INsTrUCTIONs FOr MULTI-FUNCTION 

TOOLs

GeNeraL

•  This tool should not be used by people under the age of 

16 years

•  Use completely unrolled and safe extension cords with a 

capacity of 16 Amps (U.K. 13 Amps)

•  Always check that the supply voltage is the same as the 

voltage indicated on the nameplate of the tool (tools with 

a rating of 230V or 240V can also be connected to a 

220V supply)

•  Avoid damage that can be caused by screws, nails and 

other elements in your workpiece; remove them before 

you start working

• 

secure the workpiece

 (a workpiece clamped with 

clamping devices or in a vice is held more securely than 

by hand)

• 

do not work materials containing asbestos

 (asbestos 

is considered carcinogenic)

•  Always disconnect plug from power source before 

making any adjustment or changing any accessory

•  When working, always hold the tool firmly with both 

hands and take a secure stance

•  Always keep the cord away from moving parts of the tool; 

direct the cord to the rear, away from the tool

• 

Use protective gloves when changing accessories

(contact with the accessory can lead to injuries)

•  In case of electrical or mechanical malfunction, 

immediately switch off the tool and disconnect the plug

•  If the cord is damaged or cut through while working, do 

not touch the cord, but immediately disconnect the plug

•  Never use the tool when cord is damaged; have it 

replaced by a qualified person

•  When you put away the tool, switch off the motor and 

ensure that all moving parts have come to a complete 

standstill

WHEN SAWING/CUTTING

• 

Hold power tool by insulated gripping surfaces, 

when performing an operation where the cutting 

accessory may contact hidden wiring or its own 

cord

 (a cutting accessory contacting a “live” wire may 

make exposed metal parts of the power tool “live” and 

could give the operator an electric shock)

• 

Keep hands away from cutting area

; never reach 

underneath the material for any reason while cutting

• 

Use suitable detectors to find hidden utility lines or 

call the local utility company for assistance

 (contact 

with electric lines can lead to fire or electrical shock; 

damaging a gas line can result in an explosion; 

penetrating a water pipe will cause property damage or 

an electrical shock)

•  Do not use a saw blade which is cracked, deformed or 

dull

WHEN SANDING

•  Dust from material such as paint containing lead, some 

wood species, minerals and metal may be harmful 

(contact with or inhalation of the dust may cause allergic 

reactions and/or respiratory diseases to the operator or 

bystanders); 

wear a dust mask and work with a dust 

extraction device when connectable

•  Certain kinds of dust are classified as carcinogenic (such 

as oak and beech dust) especially in conjunction with 

additives for wood conditioning; 

wear a dust mask and 

work with a dust extraction device when 

connectable

•  Follow the dust-related national requirements for the 

materials you want to work with

• 

Use the tool only for dry sanding

 (penetration of water 

into the tool increases the risk of an electric shock)

•  Do not touch the moving sanding sheet

•  Do not continue to use worn, torn or heavily clogged 

sanding sheets

•  When sanding metal, sparks are generated; do not use 

vacuum cleaner and keep other persons and combustible 

material from work area

WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):

•  Do not connect the blue (= neutral) or brown (= live) wire 

in the cord of this tool to the earth terminal of the plug

•  If for any reason the old plug is cut off the cord of this tool, 

it must be disposed of safely and not left unattended

Use

•  Changing accessories 

5

!  disconnect the plug

-  remove/mount the required accessory as illustrated

-  ensure that the openings of the accessory engange 

into the tabs of the tool head (any snap-in position 

possible)

-  mount the accessory with the depressed centre 

pointing downwards

-  loosen/fasten screw A with hex key B