Ryobi R18MT3-0 - Инструкция по эксплуатации - Страница 3

Safety, performance, and dependability have been given 

top priority in the design of your multi-tool.

INTENDED USE

The multi-tool is intended to be used only by adults who 

have read and understood the instructions and warnings 

in this manual and can be considered responsible for their 

actions. 

The multi-tool is intended to be used:

–

for sanding and finishing metal, wood, plastics, or 

similar materials using the sanding pad with the 

shaped abrasive sheets provided

–

for scraping and plunge-cutting into non-ferrous 

metal, wood, plastics, plasterboard, etc. using the 

provided metallic cutting blades

–

for cutting holes in walls to accommodate switches 

or power sockets

–

for removing grouting from between ceramic tiles

The multi-tool is intended to be operated indoors in dry, well 

illuminated and adequately ventilated conditions.

The multi-tool is not intended to be used on wet materials 

or surfaces.

Do not use the product in any way other than those stated 

for intended use.

 WARNING

Read all safety warnings, instructions, illustrations 

and specifications provided with this power tool.

Failure to follow all instructions listed below may result in 

electric shock, 

fi

 re and/or serious injury.

Save all warnings and instructions for future reference.

MULTI-TOOL SAFETY WARNINGS

■

Hold the power tool by insulated gripping surfaces, 

when performing an operation where the cutting 

accessory may contact hidden wiring.

 Cutting 

accessory contacting a “live” wire may make exposed 

metal parts of the power tool “live” and could give the 

operator an electric shock.

■

Always wear safety goggles while operating the tool. 

Wear a dust mask when dust is produced.

 WARNING

Dust from certain paints, coatings, and materials may 

cause irritation or allergic reactions. Dust from wood 

such as oak, beech, MDF, and others are carcinogenic. 

Only quali

fi

 ed specialists should be allowed to use the 

product on materials containing asbestos.

 WARNING

The product should never be connected to a power 

supply when assembling parts, making adjustments, 

cleaning, performing maintenance, or when not using 

it. Disconnecting the product from the power supply 

will prevent accidental starting that could cause serious 

injury.

■

When working in walls, ceilings or floors, take care to 

avoid electric cables and gas or water pipes.

 WARNING

Metallic accessories will become hot during use and 

could result in skin burns if contacted by the operator. 

Wear gloves when changing accessories.

Take care when setting down the tool between 

operations to prevent damage or injury.

■

Do not use cutting accessories which are damaged, 

cracked or do not fit securely to the product.

■

Ensure that the lock on switch is not in the on position 

before inserting the battery pack.

■

The multi-tool creates vibrations which move the 

accessory. The vibrations may cause discomfort if the 

product is operated for long periods of time. Take a rest 

often, especially if you feel discomfort in the arm, wrist, 

or fingers. Choose a speed setting which will get the 

work completed efficiently. Read the Residual Risks 

and Risk Reduction sections for more information on 

vibration-related injury.

■

Clamp workpiece with a clamping device. Unclamped 

workpieces can cause severe injury and damage. Do 

not hold the material you are sanding by hand.

■

Do not use sanding paper larger than needed. Extra 

paper extending beyond the sanding pad can also 

cause serious lacerations.

■

Ambient temperature range for tool during operation is 

between 0°C and 40°C.

■

Ambient temperature range for tool storage is between 

0°C and 40°C.

■

The recommended ambient temperature range for the 

charging system during charging is between 10°C and 

38°C.

ADDITIONAL BATTERY SAFETY WARNINGS

 WARNING

To reduce the risk of 

fi

 re, personal injury, and product 

damage due to a short circuit, never immerse your 

tool, battery pack or charger in 

fl

 uid or allow a 

fl

 uid  to 

fl

 ow inside them. Corrosive or conductive 

fl

 uids,  such 

as seawater, certain industrial chemicals, and bleach 

or bleach-containing products, etc., can cause a short 

circuit.

■

Ambient temperature range for battery during use is 

between 0°C and 40°C.

■

Ambient temperature range for battery storage is 

between 0°C and 20°C.

TRANSPORTING LITHIUM BATTERIES

Transport the battery in accordance with local and national 

provisions and regulations.

Follow all special requirements on packaging and labelling 

when transporting batteries by a third party. Ensure that 

no batteries can come in contact with other batteries 

or conductive materials while in transport by protecting 

exposed connectors with insulating, non-conductive caps 

1

 English 

|

EN

FR

DE

ES

IT

NL

PT

DA

SV

FI

NO

RU

PL

CS

HU

RO

LV

LT

ET

HR

SL

SK

BG

UK

TR

EL