Einhell TC-MG 220/1 E - Инструкция по эксплуатации - Страница 16

GB

- 16 -

4. Technical data

 Mains voltage:  ...................220-240 V ~ 50-60 Hz
Power input:  .............................................. 220 W
Idling speed: ............................ 11000-22000 rpm
Sanding/grinding area:  .............. 90 x 90 x 90 mm
Oscillation angle:  ........................................... 3.2°
Protection class:  ............................................ II/

Weight:  .....................................................1.65 kg

Danger!

Sound and vibration

Sound and vibration values were measured in 

accordance with EN 60745.

L

pA

 sound pressure level  ..................... 84.5 dB(A)

K

pA

 uncertainty  ............................................. 3 dB

L

WA

 sound power level   ....................... 95.5 dB(A)

K

WA

 uncertainty ............................................. 3 dB

Wear ear-mu

ff

 s.

The impact of noise can cause damage to hea-

ring.

Total vibration values (vector sum of three direc-

tions) determined in accordance with EN 60745.

Handle

Vibration emission value a

h

 = 3.611 m/s

2

K uncertainty = 1.5 m/s

2

The speci

fi

 ed vibration value was established in 

accordance with a standardized testing method. It 

may change according to how the electric equip-

ment is used and may exceed the speci

fi

 ed value 

in exceptional circumstances.

The speci

fi

 ed vibration value can be used to 

compare the equipment with other electric power 

tools.

The speci

fi

 ed vibration value can be used for initi-

al assessment of a harmful e

ff

 ect.

Keep the noise emissions and vibrations to a 

minimum.

• 

 Only use appliances which are in perfect wor-

king order.

• 

 Service and clean the appliance regularly.

• 

 Adapt your working style to suit the appliance.

• 

 Do not overload the appliance.

• 

 Have the appliance serviced whenever ne-

cessary.

• 

 Switch the appliance off when it is not in use.

• 

 Wear protective gloves.

Caution!

Residual risks

Even if you use this electric power tool in 

accordance with instructions, certain resi-

dual risks cannot be rules out. The following 

hazards may arise in connection with the 

equipment’s construction and layout:

1.   Lung damage if no suitable protective dust 

mask is used.

2.   Damage to hearing if no suitable ear protec-

tion is used.

3.   Health damage caused by hand-arm vib-

rations if the equipment is used over a pro-

longed period or is not properly guided and 

maintained.

5.  Before starting the equipment

Before you connect the equipment to the mains 

supply make sure that the data on the rating plate 

are identical to the mains data.

Warning! 

Always pull the power plug before making 

adjustments to the equipment.

 5.1 Fitting the plug-in tools (Figures 1/2)

• 

 To fit the plug-in tools safely you should hold 

the multifunction tool so that the ON/OFF 

switch (1) points down and the tool mounting 

(2) faces up.

• 

 Place the plug-in tool (e.g. the triangular 

grinding/sanding plate or Saw blade) on the 

tool mounting (2) so that the pins of the tool 

mounting (2) fit into the recesses in the plug-

in tool.

• 

Secure the plug-in tool using the supplied 

screw (5) and tighten the screw securely with 

the Hexagon key (11).

• 

Make sure that the washer (4) is used for the 

screw (5) (see Figure 2). The camber on the 

washer must face upwards.

Anl_TC_MG_220_1_E_SPK9.indb   16

Anl_TC_MG_220_1_E_SPK9.indb   16

23.08.2017   08:10:41

23.08.2017   08:10:41