Telefunken TF-1583UB - Инструкция по эксплуатации - Страница 3

Instruction manual

3

Important safeguards

•

The instruction manual contains important

operating and maintenance instructions. For 
your safety, it is necessary to refer to the 
manual. Keep the manual for future use.

• Do not hit or drop the unit
• Do not

 e

xpose the unit to vibration, direct

sunlight, too high or low temperatures or 
humidity.

• Do not disassemble the unit yourselves

Refer servicing to qualified service personnel

All the illustrations in this manual are 

schematic images, which may differ from 
actual objects.

Power supply

Remote control

10

11

LIGHT

EQ/

FM

SCAN

REPEAT

MODE

SAVE

01

02

03

04

05

08

06

07

09

12

1. REPEAT button

2. STANDBY button

3. LIGHT button

4. EQ/SAVE button

5. PLAY/PAUSE button

6. VOL+ button

7. VOL- button

8. FM/SCAN button

9. MODE button

10. PREVIOUS button

11. NEXT button

12. Number buttons

•

Press and hold the STANDBY button

General operations

Setting the clock 

Hour digits will flash. Rotate the volume knob to 

adjust the hour setting.

•

Press and hold the PLAY/PAUSE button.

to confirm and go back to the clock mode.

the unit on. Press and hold this button to turn the 

unit off. 

Turning On and Off

•

Press and hold the STANDBY button to turn

Backlight brightness

•

By default, the LED display backlight is set

to  the  3rd  level.  Press  the 

button  on  the 

unit or LIGHT on the remote  to choose  one of 

the 5 brightness levels.

Mode selection

•

Press the MODE button to select the

operation mode. The mode cycle is as follows:

USB/SD/AUX/FM/BLUETOOTH.

to power on the device. Then press this 

button again to go to the clock mode.

Minute digits will flash. Rotate the volume knob 

to adjust the minute setting.

•

Press the PLAY/PAUSE button again.

•

Press the PLAY/PAUSE button again

Power adaptor

• Plug the supplied 

Power adaptor

 into the

micro

USB port on the back of the unit. 

Connect the power cord to a household mains 
outlet. The LED indicator will light red, 
meaning is in process.

• Always remember to disconnect the power

cord from the mains before disconnecting it 
from the unit.

• Disconnect the power cord from the mains

when not in use.