Telefunken TF-1567U - Инструкция по эксплуатации - Страница 5

5

Instruction manual

5

will be shown on the screen. 

•  To switch off the player, hold the 

FUNCTION button for 2 seconds.

General USB/SD/MMC notes

•  This unit is equipped with a USB port 

that can read and play MP3 files stored on a 
standard USB flash drive (compatible with USB 
version 2.0) up to 32 GB.

•  This unit is also equipped with an SD/

MMC card socket that can accept and play 
MP3 files stored on standard SD/MMC cards 
up to 32 GB.

  Always switch off the unit or change 

mode to another one before removing a 
USB flash drive or SD/MMC card, to prevent 
damage to your USB device or memory card.

Note:

 Although this product is fully 

compatible with USB 2.0 and SD/MMC card 
standard formats, a small percentage of USB 
flash drives and SD/MMC cards might not be 
readable, due to those device manufacturers’ 
non-compliance with the full (official) USB and 
SD/MMC card standards.

•  FAT32 file system is supported by USB 

and SD/MMC of this unit.

According to the USB 1.1/2.0 Standard, 

usage of a USB device with power current 
consumption exceeding 500 mA is not 
recommended without supplementary power 
supply. Failure to use supplementary power for 
connected USB drives with power consumption 
exceeding this value as well as defective 
USB drives may cause mechanical or thermal 
changes of elements of this unit as well as 
failure of internal elements of the USB port. 
Such damages are not warranty cases.

Warning: 

usage of external USB drives 

containing BIN files in the root directory may 
cause malfunction of the unit or damage to the 
software.

Alarm operation

Alarm mode

•  In clock mode, press the ALARM button to 

activate the alarm mode.

•  In the alarm mode press and hold 

the ALARM button to set the alarm time.  
Repeatedly press the ALARM button to set 
alarm parameters in a following sequence: 
hours => minutes => alarm signal (Off/bb/FM/
USB/SD). The selected parameter will blink 
meaning readiness for adjustment.

•  Press SKIP UP to adjust the parameter up. 

Press SKIP DN to adjust the parameter down.

•  If no button is pressed within 10 seconds 

after a parameter is selected, the unit will 
automatically return to clock mode.

Alarm ringing

•  To use radio as alarm sound, enable radio 

mode, the last played station will be displayed 
and used as the alarm.

•  If radio was not set as an alarm signal, 

then the unit will beep periodically.

•  To use MP3 as alarm sound, insert a USB 

drive or SD card, then select USB or SD/MMC 
mode.

  Do not select USB/SD as alarm signal 

if a USB or memory card is not connected, 
otherwise the alarm will not work.

•  After setting the alarm, press the ALARM 

button to exit to clock mode. The ALARM mode 
is now on.

•  When the alarm goes off press any button 

(except the SNOOZE button) to stop the alarm. 
Pushing the SNOOZE button will prolong the 
alarm for 5 more minutes.