Telefunken TF-1508 - Инструкция по эксплуатации - Страница 4

4

Instruction manual

4

selected, the unit will automatically go to 

clock mode.

•  In the time setting mode, press the MODE 

button to return to the clock mode.

AUX input

To connect an external audio device (e.g. 

an MP3-player), please use a standard stereo 
cable with 3.5 mm to 3.5 mm plugs to connect 
the audio line-out of the external device to the 
AUX input socket of this unit (the cable should 
be aquired separately).

LED display functions

•  To save energy (when working on the 

AC/DC adapter) or battery life (when working 
on batteries), you can turn the display off by 
switching the DISPLAY ON/OFF switch to the 
OFF position. While in this mode you can turn 
it on for 10 seconds by pressing any button or 
by a loud sound (e.g. clapping your hands).

•  The brightness of the display is set to half 

from 22:00 to 6:59:59. Alternatively, press the 
snooze button to adjust brightness manually.

Radio operation

•  In the clock mode press the RADIO button 

to switch the radio on.

•  Press TURN+/TURN- buttons on the unit 

to change the current frequency upwards 
or downwards by 100 KHz. Press and hold 
TURN+/TURN- buttons to search the nearest 
strong signal station upwards or downwards 
automatically.

•  Hold MODE button, P01 will blink on 

the screen. Press repeatedly TURN+/TURN- 
buttons to select the preset number for the 
current frequency. Press MODE to save the 
frequency in selected position (P01-P20). 

•  Press and hold the ALARM button: the 

device will start scanning from the lowest 
frequency and automatically save all available 
stations in positions (up to 20). When stations 
are saved in the memory, repeatedly press 
TURN+/TURN- buttons to select the saved 
stations.

Sleep Timer

•  Press the SNOOZE button to set the 

sleeping time of the radio, repeteadly press to 
change the sleeping time interval from 10 to 90 
minutes. When the time expires, the radio will 
turn off.

  During program saving, if no button is 

pressed within several seconds, the unit will 
return to the normal radio mode.

•  To adjust volume, repeatedly press the 

VOL+/VOL- buttons in the radio mode.

•  Press MODE to switch the radio off.

Alarm operation

Alarm mode

•  In clock mode, hold the ALARM button to 

set the alarm time.

•  Repeatedly press the ALARM button to 

set the parameters in the following sequence: 
hours => minutes => exit. While setting, the 
digits will flash. Press the TURN+ or the 
TURN- buttons to adjust the time. If no button 
is pressed within 10 seconds after a parameter 
is selected, the unit will automatically set the 
alarm.

• If no button is pressed within 10 seconds in 

the alarm mode, the unit will exit to the clock 
mode.

Alarm ringing

• When setting the alarm, press RADIO, 

then the playing radio station will be set as the 
alarm (the playing radio frequency is set as the 
last played radio frequency), 

The alarm will ring for 15 minutes.
• If no radio station was set as an alarm 

signal, then the unit will beep periodically.

• After setting the alarm, press the MODE 

button to exit to the clock mode. 

 When setting radio as an alarm signal, 

make sure the DISPLAY ON/OFF switch on the 
back panel is switched to ON. Otherwise the 
alarm will go off in standard beeping mode.

• Press the ALARM button to enter the alarm 

mode, the “ALARM” indicator will appear on