Telefunken TF-1508 - Инструкция по эксплуатации - Страница 3

Instruction manual

3

Additional power

•  Included with the receiver are 2 AG13 

(1.5 V) batteries. The batteries are packed 
separately and not inserted in the battery 
compartment. This is an additional power 
intended for saving the clock and alarm 
settings. Without the additional power the time 
and alarm settings will not be stored if the 
power is switched off.

•  When the batteries are exhausted they 

should be replaced. New batteries should be 
aquired by the user. Replace the batteries only 
with batteries of the same type.

ATTENTION:

 The AG13 batteries are 

consumables not covered by warranty, and 
their failure (discharge) is not a ground for 
addressing service and repair centers.

AC adaptor power

•  Plug the supplied AC/DC power adaptor 

into the power input on the back of the unit. 
Connect the power cord to a power outlet. 
Make sure the voltage is compatible.

•  Always remember to disconnect the 

power cord from the electrical mains before 
unplugging it from the unit.

•  Unplug the power cord from the mains 

when not in use.

General operations

Clock

•  In the clock mode press and hold the 

SET button to enable the time setting mode. 
Repeatedly press the SET button to set the 
parameters in the following sequence: hours 
=> minutes => year => month => date => exit. 
The selected parameter will blink meaning 
readiness for adjustment.

•  Press the TURN+ button to adjust the 

parameter up. Press the TURN- to adjust the 
parameter down.

•  Day of week will be set automatically.
•  In the time setting mode, if no button is 

pressed within 10 seconds after a parameter is 

Utilization of the product

If you want to dispose of this product, do not 

mix it with general household waste. There is a 
separate collection system for used electronic 
products in accordance with legislation that 
requires proper treatment, recovery and 
recycling.

Please contact your local authorities for 

the correct method of disposal. By doing so, 
you will ensure that your disposed product 
undergoes the necessary treatment, recovery 
and recycling and thus prevent potential 
negative effects on the environment and 
human health.

Important safeguards

•  The instruction manual contains important 

operating and maintenance instructions. For 
your safety, it is necessary to refer to this 
manual. Keep the manual for future use.

•  Do not hit or drop the unit.
•  Do not expose the unit to vibration, direct 

sunlight, too high or low temperatures or 
humidity.

•  Do not disassemble the unit yourself. 

Refer servicing to qualified service personnel.

•  When the battery is exhausted, it should 

be removed from the set to prevent leakage.

Power supply

Battery power

•  Open the battery compartment cover. 

Insert 4 x AA (1.5 V) batteries (not included). 
Please observe correct battery polarities 
or the unit will not work. Close the battery 
compartment cover.

•  When the batteries are exhausted, they 

should be replaced.

•  Do not use new and old batteries together.