Радар-детекторы Crunch 217B - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
X-band, occupied by police radar, is also shared for other
uses, such as automatic door openers like the ones used at
supermarkets, burglar alarms, terrestrial microwave
emission, RF braking systems, and other devices. In
addition, other radar detectors in close proximity may falsely
alert your detector.
Compass Calibration
Press and hold the CALIBRATE button (= CITY button) for
more than 2 seconds to access compass calibration mode.
The calibration mode starts with one beep. The detector
flashes the 4 compass LEDs one after another (clockwise)
until the calibration is completed.
Perform the calibration on a level surface, following these
steps:
•
Turn the detector on. (See Power & Volume Control.)
•
Mount the detector on the windshield or the dashboard
in your vehicle. (See INSTALLING THE DETECTOR.)
•
Press and hold the CALIBRATE button (CITY button)
until you see the detector flashing the compass LEDs
clockwise, one after another.
•
Drive your vehicle in two circles. The size of the circles
and the direction that you drive does not matter. The
circles do not need to be perfect circles but must be
completed in the same direction. Each circle should take
a minimum of 20 seconds but no more than 1 minute to
complete.
•
Press the CALIBRATE button (CITY button).The
detector will end the compass calibration in two beeps
and with the 4 compass LEDs flashing twice altogether.
The compass screen will indicate which direction your
vehicle is pointing. Calibration is now complete.
29
