Пылесос Brayer BR4221 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
10
EN
Cleaning the filters
The vacuum cleaner operation efficiency depends on the
filters (19 and 24) condition. Clean the filters (19 and 24)
at least 4-5 times a year.
Cleaning the inlet filter (16)
•
Switch the vacuum cleaner off by pressing the on/off
button (15) and unplug it.
• Open the dustbag compartment lid (13) by pressing the
lid lock (12).
• Remove the dustbag holder (21) with the dustbag (20)
(pic.3).
•
Take a hold of the inlet filter (19) and remove it by
pulling upwards (pic.4).
•
Wash the inlet filter (19) with warm water and soft
detergent, rinse and dry the filter (19) thoroughly, then
install the filter (19) back to its place.
Notes:
before installing the inlet filter (19), make sure that
it is clean and dry.
• Install the dustbag holder (21) with the installed dustbag
(20 or disposable paper dustbag 27) in place.
• Close the dustbag compartment lid (13) and slightly
press on the lid (13) until the lock (12) clicks.
Cleaning the outlet HEPA filter (24)
•
Switch the vacuum cleaner off by pressing the on/off
button (15) and unplug it.
•
Remove the outlet filter grid (22) by pressing the lock
(23) and remove the HEPA filter (24).
•
Wash the HEPA filter (24) and the grid (22) under a
lukewarm water jet. Do not wash the HEPA filter (24) and
the grid (22) in a dishwashing machine.
•
Dry the HEPA filter (24).
•
Do not dry the HEPA filter (24) with a hairdryer or similar
appliances.
•
Install the HEPA filter (24) back to its place.
•
Install the outlet filter grid (22) back to its place.
Note:
before installing the HEPA filter (24), make sure that it
is clean and dry.
Vacuum cleaner body
• Clean the vacuum cleaner body with a soft, slightly damp
cloth, and then wipe it dry. Provide that no liquid gets
inside the vacuum cleaner body.
• Do not use solvents or abrasives for cleaning the vacuum
cleaner body and the attachments.
• Do not immerse the vacuum cleaner body, the power cord
and the power plug into water or any other liquids.
OVERHEATING PROTECTION
• If the electric motor gets too hot during the operation, the
overheating protection system will switch on.
•
If during the cleaning the vacuum cleaner has switched off,
press the on/off button (15) and unplug the unit.
• Let the vacuum cleaner cool down for 30-40 minutes
and switch it on again. The time of cooling down can be
different from the values above depending on the room
temperature.
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
