Пылесос Ardesto CVC-X0521WG - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
EN
26
PROBLEM AND SOLUTION
Problem
Solution
The device does not start up.
The battery is empty. Charge the device.
The device does not vacuum.
The filters are dirty/the dust cup is full.
The floor nozzle is clogged/the floor brush
is blocked.
Clean the device as described in this
manual.
The running time of the device is shorter
and shorter.
The device is not sufficiently charged.
Charge the device fully and try again.
The battery is broken or old. Contact the
after sales service.
Stuck hairs. Remove the hairs stuck on the
brushes.
Fig. 21
NOTE:
It is recommended to clean the dust cup after
every use. If the filter holder and filter is blocked caused
by the cumulation of dust, please clean or replace it in
time. The electric roll brush may be wrapped with some
hair or other dirt after long time use, so please clean it in
time to make the appliance work efficiently.
6. To remove hair from the brush, run the blade of the
scissors along the groove to cut the hair, pull it out, and
then reinsert it into the floor brush.
Fig. 6-5a Fig. 6-5b
6) To remove hair from the brush, run the blade of the scissors along the groove to
cut the hair, pull it out, and then reinsert it into the floor brush.
Fig. 6-6
NOTE: It is recommended to clean the dust cup after every use. If the filter holder and
HEPA filter is blocked caused by the cumulation of dust, please clean or replace it in
time. The electric roll brush may be wrapped with some hair or other dirt after long
time use, so please clean it in time to make the appliance work efficiently.
7. PROBLEM AND SOLUTION
Problem
Solution
The machine does not start up.
The battery is empty. Charge the machine.
The machine does not vacuum.
The filters are dirty/the dust reservoir is full.
The floor nozzle is clogged/the floor brush is
blocked.
Clean the machine as described in this manual.
The running time of the machine is shorter and
shorter.
The machine is not sufficiently charged. Charge the
machine fully and try again.
The battery is broken or old. Contact the after sales
service.
Stuck hairs. Remove the hairs stuck on the brushes.
8
7
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
