Ardesto CVC-X0521WG - Инструкция по эксплуатации - Страница 19

EN

19

INSTALLATION INSTRUCTION

Fig. 3

The body, other components and accessories are packed separately 

for convenient transportation and storage. The users shall install the 

appliance by following the operation as below when use at the first 

time.

Install the body and floor turbo brush

Insert the floor brush into the body by following the arrow shown in 

Fig. 2, when the release button (2) locks the body, rotate the handle 

(1) and make it be inserted into the body. If need to fold the handle, 

rotate the handle release button (3) .(See Fig. 3)

storage. The users shall install the appliance by following the operation as below when 
use at the first time. 
 

3.1 Install the body and floor turbo brush 

  Insert the floor brush into the body by following the arrow shown in 3-1, when the 
release button (2) locks the body, rotate the handle (1) and make it be inserted into the 
body. If need to fold the handle, rotate the handle release button (3) .(See Fig.3-2) 
 
 
 
 
 
 
 
 
 
 
 
 

4. OPERATION INSTRUCTION 

4.1 Operate the whole unit 

There are two switches including power switch (1) and power regulation 

button (2) (see Fig.4-1). Press down power switch (1), the motor starts to run, the floor 
brush indicator turns on and the appliance enters into working condition; Press down the 
power regulation button  (2), the cleaner will change to the Turbo Mode in which it 
achieves a much better cleaning performance on a hard-to-clean surface.  Once the 
power regulation button  is press again,  the cleaner will change back to the Normal 

Fig. 3-1 

1 

2 

3 

Fig. 3-2 

storage. The users shall install the appliance by following the operation as below when 
use at the first time. 
 

3.1 Install the body and floor turbo brush 

  Insert the floor brush into the body by following the arrow shown in 3-1, when the 
release button (2) locks the body, rotate the handle (1) and make it be inserted into the 
body. If need to fold the handle, rotate the handle release button (3) .(See Fig.3-2) 
 
 
 
 
 
 
 
 
 
 
 
 

4. OPERATION INSTRUCTION 

4.1 Operate the whole unit 

There are two switches including power switch (1) and power regulation 

button (2) (see Fig.4-1). Press down power switch (1), the motor starts to run, the floor 
brush indicator turns on and the appliance enters into working condition; Press down the 
power regulation button  (2), the cleaner will change to the Turbo Mode in which it 
achieves a much better cleaning performance on a hard-to-clean surface.  Once the 
power regulation button  is press again,  the cleaner will change back to the Normal 

Fig. 3-1 

1 

2 

3 

Fig. 3-2 

Fig. 2