Пылесос Ardesto CVC-D0611BB - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
EN
24
OPERATING INSTRUCTION
Overall Unit
Press the power switch NO.1 to switch on the vacuum, as figure 9;
Clean the floor or carpet when rolling brush works, and press the
power regulation button NO.2 to change turbo or normal level, the
initial setting is turbo. Press again the power switch NO.1 if you want it
to stop; Pay attention to the battery power level LED(NO.3). When the
battery power is full, it shows 100%. The screen can show the battery
percentage while using, and when it shows 0%, which means the
power is used off, the vacuum cleaner will stop.
3.3 Installing wall mount
Fix the wall mount (NO.2) on the wall by punching 4 pieces of M4*20 taper screws
(small pack of attachment) on position NO.1 and NO.3. Fig. 3-6 shows the status of the
wall mount after fixed. The long crevice tool (NO.3) and brush for upholstered furniture
(NO.4) can also hang on the wall mount when they are not in use,
as
figure 3-7.
4.
Operating Instruction
4.1
Overall Unit
Press the power switch NO.1 to switch on the vacuum, as figure 4-1; Clean the
floor or carpet when rolling brush works, and press the power regulation button NO.2 to
change turbo or normal level, the initial setting is turbo. Press again the power switch
NO.1 if you want it to stop; Pay attention to the battery power level LED(NO.3). When
the battery power is full, it shows 100%. The screen can show the battery percentage
while using, and when it shows 0%, which means the power is used off, the vacuum
cleaner will stop.
Figure 3-5
Figure 3-6
Figure 3-7
1
2
1
2
1
3
4
3.3 Installing wall mount
Fix the wall mount (NO.2) on the wall by punching 4 pieces of M4*20 taper screws
(small pack of attachment) on position NO.1 and NO.3. Fig. 3-6 shows the status of the
wall mount after fixed. The long crevice tool (NO.3) and brush for upholstered furniture
(NO.4) can also hang on the wall mount when they are not in use,
as
figure 3-7.
4.
Operating Instruction
4.1
Overall Unit
Press the power switch NO.1 to switch on the vacuum, as figure 4-1; Clean the
floor or carpet when rolling brush works, and press the power regulation button NO.2 to
change turbo or normal level, the initial setting is turbo. Press again the power switch
NO.1 if you want it to stop; Pay attention to the battery power level LED(NO.3). When
the battery power is full, it shows 100%. The screen can show the battery percentage
while using, and when it shows 0%, which means the power is used off, the vacuum
cleaner will stop.
Figure 3-5
Figure 3-6
Figure 3-7
1
2
1
2
1
3
4
4.2
Main Unit Operation
Figure 4-3
Figure 4-5
Figure 4-6
1
2
4
3
Figure 4-1
Figure 4-2
3
Main Unit Operation
Press release button NO.1 to disassemble aluminum tube and brush;
Press the button NO.2 to switch on the vacuum for cleaning furniture,
bed or wall; and press the power-control button NO.3 to switch turbo
and normal level. Press again the power switch NO.2 if you want it to
stop; Please be advised that battery LED screen NO.4 displays 100%
if fully charged. The screen can show the battery percentage while
using, and when it shows 0%, which means the power is used off, the
vacuum cleaner will stop.
Fig. 9
Fig. 10
Fig. 11
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
