Vitek VT-8140 - Инструкция по эксплуатации - Страница 4

4

 ENGLISH

tion is detected or after it was dropped, apply 

to any authorized service center at the con-

tact addresses given in the warranty certifi-

cate and on the website www.vitek.ru.

 •

To avoid damages, transport the unit in the 

original package only.

 •

Watch over the rechargeable battery. Remove 

the rechargeable battery from the vacuum 

cleaner if you are not going to use the unit for 

a long time.

 •

Keep the unit in a dry cool place out of reach 

of children and disabled persons.

THE UNIT IS INTENDED FOR HOUSEHOLD USE 

ONLY, ITS COMMERCIAL USAGE AND USAGE 

IN PRODUCTION AREAS AND WORK SPACES IS 

PROHIBITED.

SAFETY PRECAUTIONS

 •

If the suction power of the vacuum cleaner 

decreases rapidly while cleaning, switch it off 

immediately and check the extension pipe (5) 

for obstruction. Remove the obstruction and 

only then continue cleaning.

 •

Do not use the vacuum cleaner near very hot 

surfaces, ashtrays or in places where inflam-

mable liquids are stored.

ASSEMBLING THE VACUUM CLEANER

After unit transportation or storage under cold 

(winter) conditions, it is necessary to keep it for 

at least three hours at room temperature before 

switching on.

 •

Chose the place for the vacuum cleaner 

storage/ battery charging and fix the wall-

mounted holder (19). You can store the 

attachments (21 and 22) on the holder (19).

Battery charging

Before using the unit for the first time or after a 

long period of inactivity, the battery (11) needs 

to be charged for 4-6 hours.

A fully charged battery (11) provides approxi-

mately 20 minutes of continuous vacuum cleaner 

operation at maximal power level and about 

35-40 minutes of operation at low power level.

 •

Insert the power adapter (20) connecting 

cord plug into the socket (10), plug the power 

adapter in, the operation/charge indicator (3) 

will light up.

 •

When the battery (11) charging cycle is fin-

ished, the indicator (3) will glow orange.

Notes:

– 

Charge the battery (11) at the temperature 

from +5°C to +35°C.

– 

If you haven’t used the unit for a month or 

longer, charge the battery (11) completely 

before using the vacuum cleaner.

Attaching the extension pipe  

and attachments

 •

Insert the extension pipe (5) into the air inlet of 

the vacuum cleaner until the release button (4) 

clicks (pic. 1).

 •

Choose the necessary attachment the elec-

tric brush (7), the crevice nozzle (21) or the 

brush (22) and attach it to the extension pipe 

(5) (pic. 2).

Note:

– 

If necessary, you can attach the electric 

brush (7), the crevice nozzle (21) or the 

brush (22) straight to the air inlet of the vac-

uum cleaner, without using the extension 

pipe (5).

Electric brush (7)

Use the electric brush (7) for cleaning floors and 

carpets with medium and low pile, the electric 

brush (7) is perfect for removing pet hair from 

carpets. The round brush is brought to rotation 

by an electric motor built in the brush, its bristles 

thoroughly comb out pet hair and sweep motes 

out of the carpet pile.

During operation the lighting is switched on on 

the electric brush (7).

Notes:

– 

Do not use the electric brush (7) if the pile 

length exceeds 15 mm.

– 

Do not run the brush (7) over electric wires.

– 

Switch the vacuum cleaner off right after 

cleaning with the brush (7).

Crevice nozzle (21)

The nozzle (21) is intended for cleaning radiators, 

chinks, corners and spaces between cushions.

Small brush (22)

Use the brush for collecting dust from furniture 

surface, the pile on the brush (22) prevents dam-

age of polished furniture surface.

USING THE VACUUM CLEANER

Attention! 

Switch the vacuum cleaner on only 

with the dust bin (9) and the filters (16, 17, 18) 

IM VT-8140.indd   4

8/15/19   11:41 AM