VITEK VT-1847 R/B - Инструкция по эксплуатации - Страница 8

Пылесос VITEK VT-1847 R/B - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 40
Загружаем инструкцию
background image

8

 ENGLISH

Cleaning the filters (Pic. 9)

Watch if the filters (18, 19) are clean, as the 
effectiveness of the vacuum cleaner op-
eration depends upon it. Clean the filters 
no less then four times a year or often (in 
case of strong blocking). Change filters if 
required.

-  

Switch off the cleaner and unplug it from 
the wall outlet, detach the container (6) 
and remove the dust and trash out of it. 
Take the filters (18, 19) out of the con-
tainer.

-  

Clean dust and trash from the preliminary 
filter (18) and from the main HEPA filter 
(19).

-  

Wash the preliminary filter (18) and main 
HEPA filter (19) under the warm flowing 
water. (Pic. 10)

-  

Do not use the dishwasher machine for 
cleaning the filters.

-  

Dry the filters (18, 19). Do not use the hair 
drier for drying the filters. (Pic. 11)

-  Wash the dust collecting container (6) 

and dry it. (Pic. 12)

Assembling dust collecting container

-   Install the preliminary filter (18).
-  Insert the main HEPA-filter (19) into the 

dust collecting container (6).

-   Install the dust collecting container (6) at 

its former place.

Removing the output filter (15) 
(Pic. 13)

-  

Remove the output filter grill (16) by 
pressing on the latch downwards.

-  

Take out the output filter (15), wash it un-
der the flowing warm water, dry the filter 
and install it back at its former place.

-  

Install the output filter grill (16) at its 
former place.

Cleaning the turbo brush

Detach the turbo brush from the telescopic 
tube, and remove the hairs and threads 
wind round the cylinder brush.

Vacuum cleaner housing

-  

W ipe the vacuum cleaner housing with 
damp cloth. 

-  

Do not allow any liquids dropping inside 
the vacuum cleaner. 

-  

Do not use any dissolvent or abrasive de-
tergents for cleaning the vacuum cleaner 
housing. 

Technical specifications

Supply Voltage: AC 220 V ~ 50 Hz

Consumption power

: 2000 W

Suction power: 350 W
Vacuum cleaner capacity: 2,5 Litters

Noise level: 87 dB

Specifications subject to change without 
prior notice.

MINIMUM SERVICE LIFE - 5 YEARS

GUARANTEE

 

Details regarding guarantee conditions can 
be obtained from the dealer from whom 
the appliance was purchased. The bill of 
sale or receipt must be produced when 
making any claim under the terms of this 
guarantee.

This product conforms to the 
EMC-Requirements as laid 
down by the Council Directive 
89/336/EEC and to the Law 
Voltage Regulation (73/23 EEC)

1847.indd   8

1847.indd   8

06.03.2009   12:15:51

06.03.2009   12:15:51

Полезные видео

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к VITEK VT-1847 R/B?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"